What does the service of the engine control module (ECM) typically involve on GMC Canyon?

The Engine Control Module (ECM) service requires either replacement of the ecm unit or eeprom programming. The examination of the ecm requires testing to verify which component needs to be used during replacement. The replacement procedure starts with confirming the faulty ecm then continuing with new service ecm installation. Vehicle owners must execute the cpps learn operation whenever they replace or reprogram the ecm or replace the clutch pedal position sensor (CPPS) or clutch pedal to prevent accidents linked to Starter motor engagement with the vehicle in gear. Whichever you do with the ignition power status during control module connection and disconnection operations makes a difference because damaging internal control module components is one possible outcome. Let the metal case of the control module avoid direct battery voltage during maintenance service while practitioners must avoid both connector pins and soldered circuit board components as electrostatic discharge could harm them. Check that all connector surfaces have no debris before examining connector gaskets to verify they are installed correctly thus blocking contaminants from getting inside. It is necessary to program the replacement control module after installation due to which failure to enter the remaining engine oil life will set the oil change recommendation to 100 percent and trigger the need for oil replacement at 5000 km (3,000 mi) from the last change. A scan tool enables users to access the remaining engine oil life percentage before extracting the ecm harness connectors from the ecm body while keeping away from all contact points due to esd risk. The ecm bracket mounting tabs need to be disengaged during ecm removal. Mount the ecm inside its bracket by allowing the tabs to reach full engagement before attaching the ecm harness connectors to the ecm body . A newly installed ecm requires programming before application. Users should run the clutch pedal position sensor learn procedure when they have a manual transmission.

OEM GMC Canyon Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Engine Control Modules found

View related parts
GMC Canyon ECM Part Number: 12692067
$278.29 MSRP: $564.16
You Save: $285.87 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu) E92 Service ECM 2-Byte; Engine Control Module
- Replaced by: 12704477
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 GMC Canyon | Base, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Canyon PCM Part Number: 12678511
$265.60 MSRP: $538.40
You Save: $272.80 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu); Engine Control Module; ECM; Module, Emission Control System
- Replaces: 12636660, 12607096
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon ECM Part Number: 55512215
$194.82 MSRP: $352.62
You Save: $157.80 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu); Engine Control Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020 GMC Canyon | All Terrain, Denali, SLE, SLT | 4 Cyl 2.8 L DIESEL
View related parts
GMC Canyon ECM Part Number: 12700116
$173.70 MSRP: $352.81
You Save: $179.11 (51%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu) E80 Service No Start.; Engine Control Module; Module, Emission Control System
- Replaces: 12669908, 12687467
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 GMC Canyon | Base, Elevation, Elevation Standard, SL, SLE | 4 Cyl 2.5 L GAS
View related parts
GMC Canyon ECM Part Number: 12725663
$234.37 MSRP: $476.02
You Save: $241.65 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu); Module, Emission Control System
- Replaces: 12683348, 12679078, 12659039, 12708794, 12698026, 12687296
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 GMC Canyon | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Canyon ECM Part Number: 12725415
$259.04 MSRP: $526.15
You Save: $267.11 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/O Calibration); Module, Emission Control System
- Replaces: 12718010
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon ECM Part Number: 12721353
$185.01 MSRP: $331.86
You Save: $146.85 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/ 2ND Mpu) & (W/O C; Module, Emission Control System
- Replaces: 55512265
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2022 GMC Canyon | All Terrain, AT4, Denali, Elevation, SLE, SLT | 4 Cyl 2.8 L DIESEL
View related parts
GMC Canyon ECM Part Number: 12721349
$275.38 MSRP: $493.96
You Save: $218.58 (45%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu); Module, Emission Control System
- Replaces: 24000462, 55487860, 55591599
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016 GMC Canyon | SLE, SLT | 4 Cyl 2.8 L DIESEL
View related parts
GMC Canyon PCM Part Number: 12678513
$333.65 MSRP: $624.14
You Save: $290.49 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Emission Control System; Engine Control Module; ECM
- Replaces: 12633264
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2012 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
View related parts
GMC Canyon PCM Part Number: 19210067
Product Specifications
- Other Name: Module, Emission Control System; Engine Control Module; ECM
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon PCM Part Number: 19209820
Product Specifications
- Other Name: Module Assembly, Powertrain Control (Refurbished); ECM; Module, Emission Control System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
View related parts
GMC Canyon ECM Part Number: 12721348
$209.16 MSRP: $375.19
You Save: $166.03 (45%)
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu); Module, Emission Control System
- Replaces: 24000461, 55502052
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2019 GMC Canyon | All Terrain, Denali, SLE, SLT | 4 Cyl 2.8 L DIESEL

GMC Canyon Engine Control Module

Want to cut long-term maintenance and repair costs? Choose OEM Engine Control Module. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Canyon parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Canyon Engine Control Module includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The GMC Canyon Engine Control Module (ECM) is one of the essential systems on the mid of GMC's compact trucks, demonstrating the carmaker's solid focus on dependability and power of its compact pickup trucks. Known for its accuracy in sharing information on the functions of an engine, the Engine Control Module regulates the combusting of fuels, and the ratios of the fuel and air, ignition periods and several other fundamental operations according to the current signals from the sensors. This kind of technology optimizes the GMC Canyon hence making the drives safe and comfortable irrespective of the surface on which the vehicle is driven on. Engine Control Module can be fitted in numerous GMC Canyon models; therefore, it plays an important role in the series of the car's powertrain. Interestingly, the Engine Control Module is also responsible for controlling idle speed, variable valve timing, and fuel injection all of which have made a Canyon perform so well. Features that upper models are equipped with; electronic stability control being one of them, make the GMC Canyon stand tall in the automotive industry. From the durable 2.5L Ecotec I4 to the performance oriented 5.3L V8 engine, the GM canyon ECM makes every variant maximize all its capabilities. Thus, the commitment to reliability and performance provided GMC Canyon with a dependable place on the market of versatile and practical pickup trucks with the latest technology.

GMC Canyon Engine Control Module Parts Questions & Experts Answers

PCM
12678511
Q: What does the service of the engine control module (ECM) typically involve on GMC Canyon?
A:
The Engine Control Module (ECM) service requires either replacement of the ecm unit or eeprom programming. The examination of the ecm requires testing to verify which component needs to be used during replacement. The replacement procedure starts with confirming the faulty ecm then continuing with new service ecm installation. Vehicle owners must execute the cpps learn operation whenever they replace or reprogram the ecm or replace the clutch pedal position sensor (CPPS) or clutch pedal to prevent accidents linked to Starter motor engagement with the vehicle in gear. Whichever you do with the ignition power status during control module connection and disconnection operations makes a difference because damaging internal control module components is one possible outcome. Let the metal case of the control module avoid direct battery voltage during maintenance service while practitioners must avoid both connector pins and soldered circuit board components as electrostatic discharge could harm them. Check that all connector surfaces have no debris before examining connector gaskets to verify they are installed correctly thus blocking contaminants from getting inside. It is necessary to program the replacement control module after installation due to which failure to enter the remaining engine oil life will set the oil change recommendation to 100 percent and trigger the need for oil replacement at 5000 km (3,000 mi) from the last change. A scan tool enables users to access the remaining engine oil life percentage before extracting the ecm harness connectors from the ecm body while keeping away from all contact points due to esd risk. The ecm bracket mounting tabs need to be disengaged during ecm removal. Mount the ecm inside its bracket by allowing the tabs to reach full engagement before attaching the ecm harness connectors to the ecm body . A newly installed ecm requires programming before application. Users should run the clutch pedal position sensor learn procedure when they have a manual transmission.