ChevyParts
My Garage
My Account
Cart
OEM GMC Canyon Fuel Tank
Gas Tank- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Fuel Tanks found
GMC Canyon Fuel Tank
Part Number: 84577802$764.89 MSRP: $1148.47You Save: $383.58 (34%)Ships in 1-3 Business Days
GMC Canyon Fuel Tank
Part Number: 19149348$147.47 MSRP: $220.44You Save: $72.97 (34%)Ships in 1-3 Business Days
GMC Canyon Fuel Tank
Our website offers an extensive catalog of genuine GMC Canyon Fuel Tank at unbeatable prices. Every OEM GMC Canyon Fuel Tank comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Canyon Fuel Tank Parts Questions & Experts Answers
- Q: What tools are required to service and repair the fuel tank pressure sensor and replace the fuel tank module on GMC Canyon?A: The process of servicing and repairing the Fuel Tank pressure sensor along with Fuel Tank module replacement requires utilization of the fuel sender lock ring tool (J 45722). First clean all spaces surrounding fuel pipe and hose connections because impediments from contamination matter. Begin by removing the Fuel Tank while using a j 45722 to unlock the Fuel Pump module lock ring and remove it from the retaining features built into the tank. Then disconnect the evap line quick connect fittings from both the module and vent valve before detaching the evap line from the Fuel Tank clip onto its retaining features. The fuel feed line quick connect fitting must be removed from the module before being taken out of its retaining feature. Insert the fuel sender lock ring tool (J 45722) onto the Fuel Pump module lock ring but protect the lock ring from impairment. Use the j 45722 and long-breaker-bar with caution to rotate the lock ring counterclockwise until you unlock it. The Fuel Pump module emerges from the tank by removing the tool while lifting the module that should be tilted to reveal the sensor arm and float. Throw away the old Fuel Pump module seal along with draining any fuel into an approved receptacle. Clean the sealing surface of the module before checking the lock ring for any damage that exceeds 0.016 inches (0.41 mm). Replace damaged lock rings. The installation process requires using new fuel sender gasket material and Fuel Tank module seal along with proper cleaning of male pipe ends. Place the Fuel Pump module in position then lower it into place and center it correctly before securing the lock ring with the j 45722 by performing clockwise installation. To finish up the procedure you should reconnect the fuel feed line and evap line fittings before engaging them to their retaining features then reinstall the Fuel Tank.
Related GMC Canyon Parts
GMC Canyon Air Filter Box
GMC Canyon Air Intake Coupling
GMC Canyon Crankcase Breather Hose
GMC Canyon Fuel Filler Hose
GMC Canyon Fuel Pressure Sensor
GMC Canyon Fuel Pump Driver Module
GMC Canyon Fuel Pump Seal
GMC Canyon Fuel Tank Filler Neck
GMC Canyon Fuel Water Separator Filter
GMC Canyon Intake Manifold
GMC Canyon PCV Valve Hose
GMC Canyon Vapor Pressure Sensor