How to Service and Repair the Fuel Filler Hose on GMC Canyon?

Draining some fuel from the tank below the fuel fill tube should be the first step before beginning Fuel Filler Hose replacement. A sufficient height raise and support of the vehicle allows access to the Fuel Filler Hose through the wheelhouse liner so the left pickup box wheelhouse liner can be removed. First disconnect the Fuel Filler Hose from the Fuel Tank while removing the bolt which secures the Fuel Filler Hose ground strap to the frame. Before removing the Fuel Filler Hose from the vehicle disconnect both the evap hose from the filler vent tube and the Fuel Filler Hose screws. Use an appropriate cap to close the opening in the Fuel Tank. Installation starts with uncapping the Fuel Tank while directing the Fuel Filler Hose to the fender before tightening Fuel Filler Hose screws to 2 n.m (18 lb in). Use the Fuel Filler Hose to connect with the Fuel Tank while tightening its clamp to 2.5 n.m (22 lb in). Secure the evap hose to the filler vent tube by installing bolt which holds the Fuel Filler Hose ground strap to the frame. Tighten the bolt to 9 n.m (80 lb in). Place back the left pickup box wheelhouse liner and lower the vehicle before you fill the Fuel Tank then install its cap followed by an inspection for any fluid leakage.

How to replace the fuel filler hose on GMC Canyon?

The first step to replace the Fuel Tank filler hose begins by draining part of the Fuel Tank contents below its fuel fill hose level. A sufficient lift and support system allows access to the fuel fill hose through the wheelhouse liner before the left pickup box wheelhouse liner can be removed. The procedure demands removal of the fuel fill hose ground strap bolt along with the ground strap from the frame structure. The first step includes unfastening the fuel fill hose clamp which is at the Fuel Tank while disconnecting the evap line quick connect fitting from the fill tube vent line. First detach the fuel fill hose from the Fuel Tank followed by removing its screws then extracting the hose from the vehicle. Loss of contamination will be prevented by capping the Fuel Tank opening. Placing the fuel fill hose at the fender opens the tank flap before you install its screws at 2 nm (18 lb in) torque. Lay the fuel fill hose onto the Fuel Tank before attaching it and following with the fill tube vent line after connecting the Fuel Tank evap line quick connect fitting. The fuel fill hose must be clamped tightly on the Fuel Tank with a torque of 2.5 nm (22 lb in). Reinstall the ground strap on the frame after inserting its anti-rotation tab into the frame hole then tighten the fuel fill hose ground strap bolt to 9 nm (80 lb in). Lower the vehicle then reinstall the left pickup box wheelhouse liner while filling the Fuel Tank before installing the fuel fill cap.

OEM GMC Canyon Fuel Filler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Fuel Filler Hoses found

View related parts
GMC Canyon Filler Neck Part Number: 85635715
$43.78 MSRP: $65.14
You Save: $21.36 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Filler Pipe; Pipe, Fuel Tank Filler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Filler Hose Part Number: 84839725
$26.05 MSRP: $38.77
You Save: $12.72 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Tank Filler
- Replaced by: 85635716
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Filler Pipe Part Number: 84695124
$68.20 MSRP: $101.48
You Save: $33.28 (33%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Filler Hose; Pipe, Fuel Tank Filler
- Replaces: 84179260, 84266320, 84102511, 84388782, 84376465
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 GMC Canyon | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Filler Neck Part Number: 25797163
$318.98 MSRP: $475.16
You Save: $156.18 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Replaces: 15224164, 15266204
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Filler Pipe Part Number: 84695123
$156.93 MSRP: $234.57
You Save: $77.64 (34%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Filler Hose; Pipe, Fuel Tank Filler
- Replaces: 84102510, 84376464, 84388781, 84179259
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 GMC Canyon | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Filler Pipe Part Number: 84092168
$157.58 MSRP: $235.55
You Save: $77.97 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Pipe, Fuel Tank Filler
- Replaces: 23351680, 23506865
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 GMC Canyon | All Terrain, AT4, Denali, Elevation, SLE, SLT | 4 Cyl 2.8 L DIESEL
View related parts
GMC Canyon Filler Pipe Part Number: 84092167
$157.58 MSRP: $235.55
You Save: $77.97 (34%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Pipe, Fuel Tank Filler
- Replaces: 23351679, 23506866
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 GMC Canyon | All Terrain, AT4, Denali, Elevation, SLE, SLT | 4 Cyl 2.8 L DIESEL
View related parts
GMC Canyon Filler Neck Part Number: 25972296
$175.17 MSRP: $261.84
You Save: $86.67 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Filler Neck Part Number: 25972297
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Filler Hose Part Number: 25821157
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Filler Hose
- Replaces: 15226441
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Filler Hose Part Number: 25821156
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Filler Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Filler Neck Part Number: 25797164
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Replaces: 10398289, 15266205, 15226439
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Filler Pipe Part Number: 23239631
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/ Filler Hose)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 GMC Canyon | Base, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Filler Pipe Part Number: 23239630
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/ Filler Hose)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 GMC Canyon | Base, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Filler Neck Part Number: 25873548
$173.07 MSRP: $258.71
You Save: $85.64 (34%)
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Pipe, Fuel Tank Filler
- Replaces: 25797165, 10384374, 15226435
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

GMC Canyon Fuel Filler Hose

Want to cut long-term maintenance and repair costs? Choose OEM Fuel Filler Hose. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Canyon parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Canyon Fuel Filler Hose includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The GMC Canyon Fuel Filler Hose is a part that plays a pivotal role of delivering fuel into the tank of GMC Canyon vehicles boosting performance and safety. Being one of the most dependable products, this Fuel Filler Hose is intended to make the connection with the fuel fill cap inlet firmly and tightly without any possibility of leakage, thanks to the clamps and screws. Applicable with different GMC Canyon models, including those produced after 2004, this Fuel Filler Hose is a great component that is essential for fuelling of the car and thus, it is considered being a functional part of a car's system. The GMC Canyon comes in regular, extended, and crew cab models and this easy-to-install, high-quality Fuel Filler Hose compliments two-wheel and four-wheel driving capabilities of this vehicle. This aspect shows that the design of the hose not only improves the performance of the delivery of fuel but also the safety of a vehicle through the reduction the possible chances of fuel spilling. Specific details of the GMC Canyon Fuel Filler Hose include; it is built in a very strong material to enable it to withstand the challenges posed by different conditions on the road and is also compatible with the innovations that are present in the newer models. The GMC Canyon Fuel Filler Hose is an excellent example of the company's focus on delivering only the optimal to its customers and the automotive market as a whole; ensuring that every GMC Canyon is performing at its optimum optimal while also giving the owners that much needed piece of mind.

GMC Canyon Fuel Filler Hose Parts and Q&A

Filler Neck
25797163
Q: How to Service and Repair the Fuel Filler Hose on GMC Canyon?
A:
Draining some fuel from the tank below the fuel fill tube should be the first step before beginning Fuel Filler Hose replacement. A sufficient height raise and support of the vehicle allows access to the Fuel Filler Hose through the wheelhouse liner so the left pickup box wheelhouse liner can be removed. First disconnect the Fuel Filler Hose from the Fuel Tank while removing the bolt which secures the Fuel Filler Hose ground strap to the frame. Before removing the Fuel Filler Hose from the vehicle disconnect both the evap hose from the filler vent tube and the Fuel Filler Hose screws. Use an appropriate cap to close the opening in the Fuel Tank. Installation starts with uncapping the Fuel Tank while directing the Fuel Filler Hose to the fender before tightening Fuel Filler Hose screws to 2 n.m (18 lb in). Use the Fuel Filler Hose to connect with the Fuel Tank while tightening its clamp to 2.5 n.m (22 lb in). Secure the evap hose to the filler vent tube by installing bolt which holds the Fuel Filler Hose ground strap to the frame. Tighten the bolt to 9 n.m (80 lb in). Place back the left pickup box wheelhouse liner and lower the vehicle before you fill the Fuel Tank then install its cap followed by an inspection for any fluid leakage.
Filler Neck
25873548
Q: How to replace the fuel filler hose on GMC Canyon?
A:
The first step to replace the Fuel Tank filler hose begins by draining part of the Fuel Tank contents below its fuel fill hose level. A sufficient lift and support system allows access to the fuel fill hose through the wheelhouse liner before the left pickup box wheelhouse liner can be removed. The procedure demands removal of the fuel fill hose ground strap bolt along with the ground strap from the frame structure. The first step includes unfastening the fuel fill hose clamp which is at the Fuel Tank while disconnecting the evap line quick connect fitting from the fill tube vent line. First detach the fuel fill hose from the Fuel Tank followed by removing its screws then extracting the hose from the vehicle. Loss of contamination will be prevented by capping the Fuel Tank opening. Placing the fuel fill hose at the fender opens the tank flap before you install its screws at 2 nm (18 lb in) torque. Lay the fuel fill hose onto the Fuel Tank before attaching it and following with the fill tube vent line after connecting the Fuel Tank evap line quick connect fitting. The fuel fill hose must be clamped tightly on the Fuel Tank with a torque of 2.5 nm (22 lb in). Reinstall the ground strap on the frame after inserting its anti-rotation tab into the frame hole then tighten the fuel fill hose ground strap bolt to 9 nm (80 lb in). Lower the vehicle then reinstall the left pickup box wheelhouse liner while filling the Fuel Tank before installing the fuel fill cap.