How to replace the harmonic balancer on GMC Canyon?

Begin the Crankshaft balancer replacement process by taking off the cooling fan and Drive Belt followed by vehicle suspension and support. Before tightening the Crankshaft balancer eliminate the service slot plug since the balancer does not have a key-way feature which might allow Crankshaft rotation leading to incorrect torque results. Put the en 46547 inside the flywheel teeth before lowering the vehicle to remove the Crankshaft balancer bolt which should be discarded. Put the j 41816-2 on the Crankshaft end and avoid pulling the outer Crankshaft balancer edge but install a 3 jaw puller to remove the balancer. Beginning with the removal of the j 41816-2, you must extract the Crankshaft balancer friction washer found at the end of the balancer or on the Crankshaft before proceeding with cleaning and inspection of the balancer. The gm p/n 12573950 Crankshaft balancer friction washer should be placed at the end of the balancer before using the j 41478 installation tool. Position the Crankshaft balancer washer along with a fresh bolt on the assembly before using j 45059 to tighten the bolt to 150 nm while rotating the bolt 180°. Proceed with vehicle lifting before taking out the en 46547 from the flywheel teeth. Then install the service slot plug after vehicle descent and finish with Drive Belt and cooling fan installation.

OEM GMC Canyon Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Harmonic Balancers found

View related parts
GMC Canyon Crank Pulley
Part Number: 12697768
$62.77 MSRP: $107.81
You Save: $45.04 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley; Harmonic Balancer; Vibration Damper; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12626355, 12674685, 12603181
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 GMC Canyon | Base, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Vibration Damper
Part Number: 25202078
$64.89 MSRP: $110.46
You Save: $45.57 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley; Harmonic Balancer; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12657638, 12626962
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 GMC Canyon | Base, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS
View related parts
GMC Canyon Crankshaft Pulley
Part Number: 12705813
$59.24 MSRP: $92.77
You Save: $33.53 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley; Vibration Damper; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Vibration Damper
Part Number: 12697769
$91.33 MSRP: $156.85
You Save: $65.52 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley; Harmonic Balancer; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12676778
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 GMC Canyon | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Vibration Damper
Part Number: 12625430
$71.10 MSRP: $111.35
You Save: $40.25 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Balancer, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer; Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 GMC Canyon | All Terrain, AT4, Denali, Elevation, SLE, SLT | 4 Cyl 2.8 L DIESEL
View related parts
GMC Canyon Crank Pulley
Part Number: 12603180
$61.01 MSRP: $104.78
You Save: $43.77 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Balancer, Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 GMC Canyon | Base, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Vibration Damper
Part Number: 12634105
Product Specifications
- Other Name: Pulley; Harmonic Balancer; Crankshaft Balance; Balancer
- Replaces: 12576652, 12553112
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Vibration Damper
Part Number: 12578070
Product Specifications
- Other Name: Balancer, Crankshaft; Harmonic Balancer; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer; Balancer, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Vibration Damper
Part Number: 12578072
$80.60 MSRP: $126.23
You Save: $45.63 (37%)
Product Specifications
- Other Name: Balancer, Engine Crankshaft; Harmonic Balancer; Crankshaft Balance; Balancer, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS

GMC Canyon Harmonic Balancer

Our website offers an extensive catalog of genuine GMC Canyon Harmonic Balancer at unbeatable prices. Every OEM GMC Canyon Harmonic Balancer comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Canyon Harmonic Balancer Parts Questions & Experts Answers

Vibration Damper
12578072
Q: How to replace the harmonic balancer on GMC Canyon?
A: Begin the Crankshaft balancer replacement process by taking off the cooling fan and Drive Belt followed by vehicle suspension and support. Before tightening the Crankshaft balancer eliminate the service slot plug since the balancer does not have a key-way feature which might allow Crankshaft rotation leading to incorrect torque results. Put the en 46547 inside the flywheel teeth before lowering the vehicle to remove the Crankshaft balancer bolt which should be discarded. Put the j 41816-2 on the Crankshaft end and avoid pulling the outer Crankshaft balancer edge but install a 3 jaw puller to remove the balancer. Beginning with the removal of the j 41816-2, you must extract the Crankshaft balancer friction washer found at the end of the balancer or on the Crankshaft before proceeding with cleaning and inspection of the balancer. The gm p/n 12573950 Crankshaft balancer friction washer should be placed at the end of the balancer before using the j 41478 installation tool. Position the Crankshaft balancer washer along with a fresh bolt on the assembly before using j 45059 to tighten the bolt to 150 nm while rotating the bolt 180°. Proceed with vehicle lifting before taking out the en 46547 from the flywheel teeth. Then install the service slot plug after vehicle descent and finish with Drive Belt and cooling fan installation.