How to replace the TPMS Sensor on GMC Canyon?

In order to change out the Tire Pressure Indicator Sensor, first lift the vehicle on an appropriate support. Remove the tire/wheel assembly from the vehicle, placing sensor's cap and valve on a clean surface after removal, because the cap is made of aluminum and valve is nickel plated to avoid corrosion. Set the bead breaking fixture 90 degrees from valve stem and slide tire iron or pry bar a little to the right of the sensor body while prying the bead up over mounting/dismounting head. Use the tire machine and rotate the tire/wheel assembly clockwise as you move the bead of the tire to the outside of the wheel rim, then repeat it with the inner bead. After transferring the tire from the wheel, make sure the leftover tire sealant is scrubbed off the inside surfaces. Then push out the tire pressure sensor nut and the sensor itself. For installation, remove all fells from the place of putting the seal on the grommet and insert the sensor into the place of the wheel hole so that the air passage is away from the wheel, by putting the sensor body in a place of 7 N.m (62 lb in), on the interior side of the wheel. Before mounting the same tire, orient the mounting/dismounting head 180 degrees away from valve stem and implement bead transition area, 45 degrees counter clock wise the valve stem, turn the tire whealorum clockwise and do again for farther bead. Mount the tire on the wheel, with the notice that a service replacement tire pressure sensor is supplied in OFF mode and needs to be run at 32 km/h (20 mph) or more for more than 10 seconds in order to shut off the inner roll switch. Lastly, mount the tire/wheel assembly on the vehicle, bring down the vehicle, and familiarize with the tire pressure sensors.

OEM GMC Canyon TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 TPMS Sensors found

View related parts
GMC Canyon Tire Pressure Sensor, Black
Part Number: 13598909
$10.46 MSRP: $19.64
You Save: $9.18 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Kit, Tire Valve And Cover Lock; TPMS Sensor Service Kit; TPMS Sensor; Valve Stem; Repair Kit; Tire Sensor Valve; TPMS Sensor Valve Assembly; Tire Valve Kit; Vehicle Security & Safety.
- Replaces: 15263240, 19368646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 GMC Canyon | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon TPMS Sensor
Part Number: 20927604
$70.63 MSRP: $138.28
You Save: $67.65 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Tire Pressure Indicator; Tire Pressure Monitoring System (TPMS) Sensor; Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaces: 15122618
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2012 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon TPMS Sensor
Part Number: 13540607
$27.15 MSRP: $50.98
You Save: $23.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Tire Pressure Indicator; Tire Pressure Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaces: 13512346
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2022 GMC Canyon | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon TPMS Sensor
Part Number: 13556202
$38.51 MSRP: $68.76
You Save: $30.25 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Tire Pressure Indicator; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaces: 13530661, 13593960, 13538761
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon TPMS Sensor
Part Number: 13540601
$56.06 MSRP: $108.80
You Save: $52.74 (49%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Tire Pressure Indicator; Tire Pressure Sensor; Valve Stem; Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaces: 12768826, 13598772, 13589597, 22854866, 20922900, 13589255, 13581558
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 GMC Canyon | All Terrain, Base, Denali, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon TPMS Sensor
Part Number: 13538761
$38.51 MSRP: $68.76
You Save: $30.25 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Tire Pressure Indicator; Tire Pressure Sensor; Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaced by: 13556202
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Tire Pressure Sensor
Part Number: 84991144
$33.60 MSRP: $40.00
You Save: $6.40 (16%)
Product Specifications
- Other Name: Tire Pressure Monitor (Xl8-433Mhz); Sensor Package, Tire Pressure
- Replaced by: 86530815
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS

GMC Canyon TPMS Sensor

Our website offers an extensive catalog of genuine GMC Canyon TPMS Sensor at unbeatable prices. Every OEM GMC Canyon TPMS Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Canyon TPMS Sensor Parts Questions & Experts Answers

TPMS Sensor
20927604
Q: How to replace the TPMS Sensor on GMC Canyon?
A: In order to change out the Tire Pressure Indicator Sensor, first lift the vehicle on an appropriate support. Remove the tire/wheel assembly from the vehicle, placing sensor's cap and valve on a clean surface after removal, because the cap is made of aluminum and valve is nickel plated to avoid corrosion. Set the bead breaking fixture 90 degrees from valve stem and slide tire iron or pry bar a little to the right of the sensor body while prying the bead up over mounting/dismounting head. Use the tire machine and rotate the tire/wheel assembly clockwise as you move the bead of the tire to the outside of the wheel rim, then repeat it with the inner bead. After transferring the tire from the wheel, make sure the leftover tire sealant is scrubbed off the inside surfaces. Then push out the tire pressure sensor nut and the sensor itself. For installation, remove all fells from the place of putting the seal on the grommet and insert the sensor into the place of the wheel hole so that the air passage is away from the wheel, by putting the sensor body in a place of 7 N.m (62 lb in), on the interior side of the wheel. Before mounting the same tire, orient the mounting/dismounting head 180 degrees away from valve stem and implement bead transition area, 45 degrees counter clock wise the valve stem, turn the tire whealorum clockwise and do again for farther bead. Mount the tire on the wheel, with the notice that a service replacement tire pressure sensor is supplied in OFF mode and needs to be run at 32 km/h (20 mph) or more for more than 10 seconds in order to shut off the inner roll switch. Lastly, mount the tire/wheel assembly on the vehicle, bring down the vehicle, and familiarize with the tire pressure sensors.