Other Name: Pump Kit, Water; Water Pump Assembly; Pump Kit, Engine Coolant
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1985-1986 GMC Safari | Base, SL, SLE, SLX | 4 Cyl 2.5 L GAS
GMC Safari Water Pump
Our website offers an extensive catalog of genuine GMC Safari Water Pump at unbeatable prices. Every OEM GMC Safari Water Pump comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Safari Water Pump Parts Questions & Experts Answers
A: Before handling the Water Pump start by letting the engine cool down first to prevent burns and then drain the coolant from the Radiator. Open up the engine compartment to remove the air cleaner assembly plus the maf sensor with both the upper Fan Shroud and Drive Belt. Additionally, disconnect the fan and Fan Blade clutch assembly. To access the coolant pump first unbolt and remove its pulley together with any attached hoses. Afterwards get rid of the coolant bypass clamps before detaching the Radiator outlet hose. Take out the coolant pump with four bolts after checking that both gasket mating surfaces are perfect and burr-free. Check all components and upgrade damaged parts when required. Secure the new gaskets to the bolt holes and fit the coolant pump in place by tightening four bolts to 45 nm (33 ft. Lbs.). Place the Radiator outlet hose back onto the coolant pump and fasten the clamps before attaching the coolant bypass hose to its connectors. Hang the coolant pump pulley onto its position and secure its bolts with 25 nm torque settings. Put back the fan parts properly by attaching both the fan and Fan Blade clutch unit but also the Drive Belt and upper Fan Shroud bolts. Complete the assembly with map sensor and air cleaner component installation. Check for leaks once the Radiator coolant has reached normal operating temperature and begin filling the Radiator system.