How to replace the Upper Steering Column Bearing on GMC Savana 3500?

Begin intermediate steering shaft bearing replacement by positioning the vehicle with straight wheels while locking the Steering Column because this prevents sir coil assembly damage. Harmful procedures start with the installation of Steering Column anti-rotation pin (J 42640) through the Steering Column lower access hole. After removing the lower intermediate shaft, workers should disconnect Power Steering Reservoir mounting nuts before moving the reservoir to avoid the workspace. Before moving on to the next step replace the Cruise Control Module's mounting nuts before placing the module off to the side. Open the intermediate shaft seal at the cowl mounting screws, allow the seal to drop while removing the upper intermediate shaft to intermediate shaft bearing retaining bolt. Begin by removing the retaining nuts from the intermediate shaft bearing bracket then detach the intermediate shaft lower brace retaining nut. Detach the intermediate shaft bearing at its studs on the cowl before disconnecting it from the upper intermediate shaft and completing removal of both the bearing and seal. Begin your installation process by attaching the intermediate shaft seal followed by connecting the intermediate shaft bearing to both the upper intermediate shaft and cowl studs. After placing the lower brace retaining nut, apply torque of 30 nm (22 ft. Lbs.) before tightening the intermediate shaft bearing bracket retaining nuts to 30 nm (22 ft. Lbs.). Tighten the retaining bolt connecting the upper intermediate shaft to the intermediate shaft bearing to 30 nm (22 ft. Lbs.) before screwing in the intermediate shaft seal upper retaining screws and securing them to 2 nm (18 inch lbs.). Thread the Cruise Control Module mounting nuts before applying 5 nm (44 inch lbs.) torque. Next position the Power Steering Reservoir in its seat then install its mounting nuts tightened to 6.5 nm (58 inch lbs.). Install the lower intermediate shaft before removing the Steering Column anti-rotation pin (J 42640) through the Steering Column lower access hole.

OEM GMC Savana 3500 Upper Steering Column Bearing

Upper Tilt Steering Column Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Upper Steering Column Bearings found

View related parts
GMC Savana 3500 Bearing Assembly Part Number: 88963617
$33.09 MSRP: $54.51
You Save: $21.42 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Steering Column; Bearing Kit; Lower Bearing; Lower Bearings
- Position: Lower
- Replaces: 26069723, 26056146
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2021 GMC Savana 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
GMC Savana 3500 Shaft Bearings Part Number: 26001827
$50.91 MSRP: $86.67
You Save: $35.76 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Steering Column; Bearing Assembly; Bearing Kit; Housing Bearing; Upper/Lower Bearings; Steering Column Bearings.
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2019 GMC Savana 3500 | Base, LS, LT, SLE, SLT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Bearing Housing, Upper Part Number: 7819517
$41.29 MSRP: $74.96
You Save: $33.67 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing S; Shaft Bearings; Cover Bearing; Upper Housing; Lock Housing; Rack Package; Shroud; Steering Column
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 3500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Bearing Part Number: 26002086
$8.18 MSRP: $19.12
You Save: $10.94 (58%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Steering Column
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 3500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Bearing Assembly Part Number: 23275358
$85.38 MSRP: $133.70
You Save: $48.32 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Steering Column; Steering Shaft; Upper Shaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2024 GMC Savana 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
GMC Savana 3500 Bearing Assembly, Lower Part Number: 26086158
Product Specifications
- Other Name: Bearing Assembly, Steering Shaft Lower (Includes Adapter); Bearing Kit; Bearing, Steering Column
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2013 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Bearing Assembly Part Number: 25754172
Product Specifications
- Other Name: Bearing, Steering Column
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Bearing Assembly Part Number: 22969824
$68.84 MSRP: $107.83
You Save: $38.99 (37%)
Product Specifications
- Other Name: Bearing, Steering Column
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014 GMC Savana 3500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.6 L DIESEL

GMC Savana 3500 Upper Steering Column Bearing

Want to cut long-term maintenance and repair costs? Choose OEM Upper Steering Column Bearing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Savana 3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Savana 3500 Upper Steering Column Bearing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Savana 3500 Upper Steering Column Bearing Parts and Q&A

Shaft Bearings
26001827
Q: How to replace the Upper Steering Column Bearing on GMC Savana 3500?
A:
Begin intermediate steering shaft bearing replacement by positioning the vehicle with straight wheels while locking the Steering Column because this prevents sir coil assembly damage. Harmful procedures start with the installation of Steering Column anti-rotation pin (J 42640) through the Steering Column lower access hole. After removing the lower intermediate shaft, workers should disconnect Power Steering Reservoir mounting nuts before moving the reservoir to avoid the workspace. Before moving on to the next step replace the Cruise Control Module's mounting nuts before placing the module off to the side. Open the intermediate shaft seal at the cowl mounting screws, allow the seal to drop while removing the upper intermediate shaft to intermediate shaft bearing retaining bolt. Begin by removing the retaining nuts from the intermediate shaft bearing bracket then detach the intermediate shaft lower brace retaining nut. Detach the intermediate shaft bearing at its studs on the cowl before disconnecting it from the upper intermediate shaft and completing removal of both the bearing and seal. Begin your installation process by attaching the intermediate shaft seal followed by connecting the intermediate shaft bearing to both the upper intermediate shaft and cowl studs. After placing the lower brace retaining nut, apply torque of 30 nm (22 ft. Lbs.) before tightening the intermediate shaft bearing bracket retaining nuts to 30 nm (22 ft. Lbs.). Tighten the retaining bolt connecting the upper intermediate shaft to the intermediate shaft bearing to 30 nm (22 ft. Lbs.) before screwing in the intermediate shaft seal upper retaining screws and securing them to 2 nm (18 inch lbs.). Thread the Cruise Control Module mounting nuts before applying 5 nm (44 inch lbs.) torque. Next position the Power Steering Reservoir in its seat then install its mounting nuts tightened to 6.5 nm (58 inch lbs.). Install the lower intermediate shaft before removing the Steering Column anti-rotation pin (J 42640) through the Steering Column lower access hole.