How to replace the Camshaft Position Sensor on GMC Sierra 3500?

The first step for replacing the Camshaft Position (CMP) Sensor requires vehicle elevation and support systems according to proper procedures. Start by removing bolts from the engine shield while also removing the shield if it is present. Cut the electrical connector for the CMP sensor before disconnecting the bolt that holds the sensor itself and removing the CMP sensor. Inspect the sensor for potential wear and cracks and leakage when the replacement is not necessary. Check the CMP sensor O-ring for wear and damage before installing it and replace any damaged O-rings with new ones. Replace the damaged O-ring and apply engine oil for lubrication before installing the new O-ring. Secure the CMP sensor onto its bolt position and tighten until it reaches 12 N.m (106 lb in). The CMP sensor electrical connector needs reconnection after which install the engine shield and bolts with 20 N.m (15 lb ft) torque setting. Finally, lower the vehicle.

OEM GMC Sierra 3500 Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Camshaft Position Sensors found

View related parts
GMC Sierra 3500 Camshaft Position Sensor
Part Number: 12591720
$53.35 MSRP: $99.54
You Save: $46.19 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 12568983, 12585545
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Camshaft Position Sensor
Part Number: 97365038
$80.06 MSRP: $162.60
You Save: $82.54 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 GMC Sierra 3500 | SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Sierra 3500 Camshaft Position Sensor
Part Number: 25366551
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor
- Replaces: 25339321, 97226121
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Sierra 3500 Camshaft Position Sensor
Part Number: 97321398
$80.65 MSRP: $126.33
You Save: $45.68 (37%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 GMC Sierra 3500 | Base, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Sierra 3500 Camshaft Position Sensor
Part Number: 12575183
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Replaces: 12572657
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 GMC Sierra 3500 | Base, SLE, SLT, WT | 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Camshaft Position Sensor
Part Number: 19420911
$71.22 MSRP: $127.17
You Save: $55.95 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Replaces: 12561211, 19420372
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS

GMC Sierra 3500 Camshaft Position Sensor

Our website offers an extensive catalog of genuine GMC Sierra 3500 Camshaft Position Sensor at unbeatable prices. Every OEM GMC Sierra 3500 Camshaft Position Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Sierra 3500 Camshaft Position Sensor Parts Questions & Experts Answers

Camshaft Position Sensor
97365038
Q: How to replace the Camshaft Position Sensor on GMC Sierra 3500?
A: The first step for replacing the Camshaft Position (CMP) Sensor requires vehicle elevation and support systems according to proper procedures. Start by removing bolts from the engine shield while also removing the shield if it is present. Cut the electrical connector for the CMP sensor before disconnecting the bolt that holds the sensor itself and removing the CMP sensor. Inspect the sensor for potential wear and cracks and leakage when the replacement is not necessary. Check the CMP sensor O-ring for wear and damage before installing it and replace any damaged O-rings with new ones. Replace the damaged O-ring and apply engine oil for lubrication before installing the new O-ring. Secure the CMP sensor onto its bolt position and tighten until it reaches 12 N.m (106 lb in). The CMP sensor electrical connector needs reconnection after which install the engine shield and bolts with 20 N.m (15 lb ft) torque setting. Finally, lower the vehicle.

Related GMC Sierra 3500 Parts

Browse GMC Sierra 3500 Camshaft Position Sensor by Years

2006 2005 2004 2003 2002 2001