To replace the generator in vehicles with 4.8l, 5.3l, 6.0l, and 6.2l engines, take the necessary action starting by never left behind that to remove the negative
Battery Cable. Remove the intake manifold sight shield and the accessary
Drive Belt. Unplug the engine harness electrical connector from the generator, move the generator battery jumper cable boot. Disconnect the jumper cable nut and the terminal of the generator , then remove the generator bolts to remove the generator. To install, first install the generator and strictly follow the fastener notice. Surface the generator bolts to 55 n.m (41 lb ft) then attach the generator battery jumper cable terminal to the generator stud and the nut to the generator, sue tighten it to 9 n.m (80 lb in). Position the generator battery jumper cable boot along with the connection of the engine harness electrical connector to the generator. Last but not least, reinstall the accessory Drive Belt, the intake manifold sight shield, and reconnect negative Battery Cable.