How to replace the torsion bar and support assembly (bushing style) on GMC Sierra 3500 Classic?

To replace the Torsion Bar and support assembly (bushing style), commence by picking the vehicle and supporting it. Engage the Torsion Bar unloading/loading tool (J 36202) to the adjustment arm and the crossmember. Tighten the adjustment arm with the j 36202 until the adjustment bolt and adjuster nut are freed of the load and then mark the adjustment bolt and count the turns needed for removal. Then, unbolt the adjustment bolt and adjust nut from the cross member followed finally removing the j36202 for the Torsion Bar to unload. Sliding the bar forward at adjustment arm , and thereafter take Torsion Bar crossmember bolt bolt out of the weld nut followed by taking the crossmember from the crossmember mount . Finally, remove the Torsion Bar from the crossmember as well as the vehicle. In installing the Torsion Bar position it in the bottom Control Arm, position also in the crossmember on the mount of the crossmember. Mount the Torsion Bar crossmember bolt in the weld nut and tighten, using 95 n.m (70 lb ft). Next, install the adjustment arm at the crossmember with the adjustment bolt and adjuster nut being installed. Seating the Torsion Bar fully to the adjustment arm, then reattaching the j 36202 to the adjustment arm and crossmember. Tighten the adjustment arm while increasing tension to load the Torsion Bar, twist the adjuster bolt the same number of turns that it required to remove. Finally, remove the j 36202 after taking off the crossmember, the safety stands, lower the vehicle and take the z height.

OEM GMC Sierra 3500 Classic Torsion Bar

Suspension Torsion Bar

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Torsion Bars found

View related parts
GMC Sierra 3500 Classic Torsion Bar, Front Driver Side Part Number: 19330060
$312.71 MSRP: $492.03
You Save: $179.32 (37%)
ADD TO CART
Product Specifications
- Other Name: Bar, Front Torsion; Ball Joint; Lower Ball Joint; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15528965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Classic Torsion Bar, Front Passenger Side Part Number: 19330059
$312.71 MSRP: $492.03
You Save: $179.32 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Front Torsion; Ball Joint; Lower Ball Joint; Bar, Front Chassis
- Position: Front Passenger Side
- Replaces: 15528966
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Classic Torsion Bar, Front Passenger Side Part Number: 19332946
$257.82 MSRP: $405.67
You Save: $147.85 (37%)
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
- Replaces: 15528958
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Classic Torsion Bar, Front Driver Side Part Number: 19332945
$257.82 MSRP: $405.67
You Save: $147.85 (37%)
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15528957
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Classic Torsion Bar, Front Driver Side Part Number: 19330062
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15732338
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Classic Torsion Bar, Front Passenger Side Part Number: 19330061
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
- Replaces: 15732339
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS

GMC Sierra 3500 Classic Torsion Bar

Want to cut long-term maintenance and repair costs? Choose OEM Torsion Bar. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Sierra 3500 Classic parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Sierra 3500 Classic Torsion Bar includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Sierra 3500 Classic Torsion Bar Parts Questions & Experts Answers

Torsion Bar, Front Driver Side
19330060
Q: How to replace the torsion bar and support assembly (bushing style) on GMC Sierra 3500 Classic?
A:
To replace the Torsion Bar and support assembly (bushing style), commence by picking the vehicle and supporting it. Engage the Torsion Bar unloading/loading tool (J 36202) to the adjustment arm and the crossmember. Tighten the adjustment arm with the j 36202 until the adjustment bolt and adjuster nut are freed of the load and then mark the adjustment bolt and count the turns needed for removal. Then, unbolt the adjustment bolt and adjust nut from the cross member followed finally removing the j36202 for the Torsion Bar to unload. Sliding the bar forward at adjustment arm , and thereafter take Torsion Bar crossmember bolt bolt out of the weld nut followed by taking the crossmember from the crossmember mount . Finally, remove the Torsion Bar from the crossmember as well as the vehicle. In installing the Torsion Bar position it in the bottom Control Arm, position also in the crossmember on the mount of the crossmember. Mount the Torsion Bar crossmember bolt in the weld nut and tighten, using 95 n.m (70 lb ft). Next, install the adjustment arm at the crossmember with the adjustment bolt and adjuster nut being installed. Seating the Torsion Bar fully to the adjustment arm, then reattaching the j 36202 to the adjustment arm and crossmember. Tighten the adjustment arm while increasing tension to load the Torsion Bar, twist the adjuster bolt the same number of turns that it required to remove. Finally, remove the j 36202 after taking off the crossmember, the safety stands, lower the vehicle and take the z height.