Begin the oil level indicator and tube replacement process by taking out the oil level indicator from the indicator tube then disconnect and delete the engine coolant temperature (ECT) sensor electrical connector from the indicator tube. Home the indicator tube bolt then disconnect the indicator tube bracket before removing the o-ring seal from the indicator tube. When installing the indicator system maintain safe distance between the tube and
Spark Plug Wires and direct the wires to go around it. New o-ring seals must be placed onto the indicator tube before inserting it into the
Oil Pan while position the bracket to line up with the block hole. Secure the indicator tube bolt at 25 nm torque (18 ft. Lbs.). The installation requires reattaching the ect sensor connector to the indicator tube and connecting the ect sensor electrical connector followed by installing the oil level indicator to the tube.