ChevyParts
My Garage
My Account
Cart
OEM GMC Sierra 3500 Torsion Bar
Suspension Torsion Bar- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Torsion Bars found
GMC Sierra 3500 Torsion Bar, Front Driver Side
Part Number: 19330060$286.89 MSRP: $451.40You Save: $164.51 (37%)
GMC Sierra 3500 Torsion Bar, Front Passenger Side
Part Number: 19330059$286.89 MSRP: $451.40You Save: $164.51 (37%)Ships in 1-3 Business Days
GMC Sierra 3500 Torsion Bar, Front Passenger Side
Part Number: 19332946$257.82 MSRP: $405.67You Save: $147.85 (37%)
GMC Sierra 3500 Torsion Bar, Front Driver Side
Part Number: 19332945$257.82 MSRP: $405.67You Save: $147.85 (37%)
GMC Sierra 3500 Torsion Bar
Our website offers an extensive catalog of genuine GMC Sierra 3500 Torsion Bar at unbeatable prices. Every OEM GMC Sierra 3500 Torsion Bar comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Sierra 3500 Torsion Bar Parts Questions & Experts Answers
- Q: How to replace the torsion bar on GMC Sierra 3500?A: Before you replace the Torsion Bar, first lift and prop up the vehicle. Handle the torsion bars carefully so as not to damage the coating, which is likely to cause premature failure. Mount the Torsion Bar unloading/loading tool (J 36202) to the adjustment arm and crossmember, and tighten head bolt on adjustment arm until the load is taken off from the adjustment bolt and adjuster nut. Take off the adjustment bolt, and the adjuster nut, making sure to mark the adjustment bolt, counting the number of turns that are necessary to remove. In the case of vehicles with mn8, mt1, and mw3, take a repeat for the removal of the adjustment bolt and adjuster nut. After the removal of the j 36202, then unloading of the Torsion Bar, slide the Torsion Bar forward in removing the adjustment arm being supported. Then remove the Torsion Bar crossmember bolts from the weld nuts (follow by top linking to the nuts and bolts and then removing the Torsion Bar crossmember and the torsion bars write down where you put them left and right as they are different. To install, start by installing the torsion bars to the lower Control Arm and the Torsion Bar crossmember from the other side by then applying the Torsion Bar crossmember bolts to the weld nuts then tightening to 95 nm (70 ft. Lbs.). Mount the upper link nuts and bolts with the nut being tighten to 95 nm (70 ft. Lbs.). With the support of the adjustment arm, slide the Torsion Bar rearward to its full engagement with the adjustment arm, reinstall the j 36202 to the adjustment arm and crossmember, increasing the tension to load the Torsion Bar. Install adjustment bolt and adjuster nut making sure the adjustment bolt is installed to readjust back the same number of turns as done while removing it. Repeat installation of both the adjustment bolt and the adjuster nut for vehicles that have mn8, mt1, and mw3. Finally remove the j 36202, release the tension on the Torsion Bar until the adjustment bolt accepts the load, take off the safety stands, lower the vehicle and where necessary adjust adjusting bolt to change the z height from a counter-clockwise position to increase and to.clockwise to decrease.
Related GMC Sierra 3500 Parts
GMC Sierra 3500 Alignment Bolt
GMC Sierra 3500 Ball Joint
GMC Sierra 3500 Coil Spring Insulator
GMC Sierra 3500 Coil Springs
GMC Sierra 3500 Control Arm
GMC Sierra 3500 Control Arm Bushing
GMC Sierra 3500 Shock Absorber
GMC Sierra 3500 Steering Knuckle
GMC Sierra 3500 Sway Bar Bracket
GMC Sierra 3500 Sway Bar Bushing
GMC Sierra 3500 Sway Bar Kit
GMC Sierra 3500 Sway Bar Link