Other Name: Sensor, Front Wheel Speed; ABS Sensor; Front Speed Sensor; Sensor, Electro - Hydraulic Control
Position: Front
Replaced by: 19300584
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2001-2006 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
GMC Sierra 3500 Wheel Speed Sensor
Our website offers an extensive catalog of genuine GMC Sierra 3500 Wheel Speed Sensor at unbeatable prices. Every OEM GMC Sierra 3500 Wheel Speed Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Sierra 3500 Wheel Speed Sensor Parts Questions & Experts Answers
Q: How to replace the front wheel speed sensor (WSS) on a 4 Wheel Drive on GMC Sierra 3500?
A: To fix the front Wheel Speed Sensor (WSS) on 4 wheel drive vehicles start by lifting and holding the vehicle followed by taking off the tire and wheel. Proceed by removing the brake rotor according to model 1500. Unscrewing the mounting bolt disconnects the wss cable first from the knuckle then the upper Control Arm and frame. Afterwards pull away the wss electrical connector and remove the mounting bolt. Remove the speed sensor from the bore without using tools to protect against damaging the sensor body. Before beginning installation you need to plug the wss bore on the hub. Clean the wss contact surface on the hub with wire brush or equivalent and then apply a thin layer of wheel bearing lubricant to both the hub and sensor o-ring. Insert the wss correctly onto its bearing assembly location before you install its bolt and tighten it to 18 nm (13 ft. Lbs.). Install mounting clips again to knuckle, upper Control Arm joints, and frame holder then attach wss wire connector. Put on the brake rotor the same way as 1500-series cars before resting the tire and wheel on their position. Run the system diagnostic test at vehicle level.