How to service and repair the front wheel bearing on GMC Sierra 3500?

The process to service or repair front wheel bearings starts by hoisting your vehicle. First remove the tire together with the wheel then take off the rotor. Detach the Wheel Speed Sensor and brake hose mounting bracket bolt from the Steering Knuckle before removing the wheel drive shaft nut retaining cover. A brand-new nut needs to be used when you install the wheel drive shaft. The procedure requires removal of the wheel drive shaft assembly retaining nut and its accompanying washer. Start by using the axle remover (J 45859) to free the wheel drive shaft from the Wheel Hub and bearing. Remove first the 15-series bearing mounting bolts before taking out the 25/35 series mounting bolts. The vehicle receives a Wheel Hub separation followed by bearing extraction alongside splash shield extraction and an o-ring seal removal from the Steering Knuckle bore that operates through the 25/35 series. Test the o-ring seal by checking for nicks, cuts and dryness, brittleness and compression set. Replace the o-ring if damage occurs. Suspension professionals need to remove all contaminants and corrosion from the Steering Knuckle bore and the hub and bearing assembly before they lubricate the knuckle bore with Wheel Bearing grease or another equivalent product. Tighten the Wheel Speed Sensor mounting bolt to the Wheel Hub and bearing assembly until it reaches 18 nm (13 ft. Lbs.). Next install the o-ring to the Steering Knuckle, 25/35 series. After completing the Wheel Hub and bearing and splash shield installation on the vehicle, proceed to install the Wheel Hub and bearing and splash shield on the vehicle, 15 series. Both 15 series and 25/35 series Wheel Hub and bearing mounting bolts require a torque setting of 180 nm (133 ft. Lbs.) to fasten the Wheel Hub to the knuckle. Use nut along with washer to secure the wheel drive shaft assembly to Wheel Hub and bearing. Torque the nut to 240 nm (177 ft. Lbs.) before installing the Wheel Speed Sensor and brake hose mounting bracket bolt to Steering Knuckle then tighten brake hose clip bolt to 12 nm (106 inch lbs.). Finish setup by adding the rotor then installing tire and wheel and finally lowering the vehicle down.

OEM GMC Sierra 3500 Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Wheel Bearings found

View related parts
GMC Sierra 3500 Wheel Bearing, Rear
Part Number: 12479031
$49.62 MSRP: $96.32
You Save: $46.70 (49%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Axle Shaft; Wheel Bearing Kit; Axle Bearing; Axle Bearings; Shaft Bearings; Outer Bearing; Bearing; Bearing, Rear Wheel
- Position: Rear
- Replaces: 09442126, 9442126
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Output Shaft Bearing, Front
Part Number: 26066885
$30.31 MSRP: $56.92
You Save: $26.61 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Axle; Differential Pinion Bearing; Wheel Bearing; Axle Bearing; Inner Pinion Bearing; Bearing, Front Axle And Axle Center
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Wheel Bearing
Part Number: 9439561
$72.53 MSRP: $131.28
You Save: $58.75 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Wheel Bearing; Axle Bearing; Axle Bearings; Shaft Bearings; Outer Bearing; Bearing; Bearing, Rear Axle Shaft; Bearing, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Wheel Bearing
Part Number: 9436881
$76.25 MSRP: $145.36
You Save: $69.11 (48%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential; Differential Pinion Bearing; Differential Bearing; Axle Bearings; Shaft; Inner; Side; Differential Gear; Front Wheel; Rear Wheel; Nut.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Wheel Bearing
Part Number: 9428908
$69.42 MSRP: $98.04
You Save: $28.62 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Wheel Outer; Axle Bearings, Shaft Bearings, Grease Cap, Outer Bearing, Bearing Assembly, Front Wheel Outer, Rear Wheel.
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Hub, Rear
Part Number: 25843093
$284.08 MSRP: $509.56
You Save: $225.48 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Rear Wheel; Hub, Rear Wheel
- Position: Rear
- Replaces: 15712805, 15829645
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Wheel Bearings, Rear
Part Number: 15042155
$53.61 MSRP: $100.68
You Save: $47.07 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Wheel; Axle Bearing; Inner Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Wheel Bearings, Rear
Part Number: 15042154
$43.46 MSRP: $84.36
You Save: $40.90 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Wheel; Axle Bearing; Outer Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Front Hub
Part Number: 19419502
$357.68 MSRP: $641.58
You Save: $283.90 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Bearing & Wheel Speed Sensor); Hub & Bearing; Hub, Front Wheel
- Position: Front
- Replaces: 15225752, 89059058, 89059060, 15225753, 15056760, 15946733, 15056753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Hub, Rear
Part Number: 15115916
Product Specifications
- Other Name: Hub Assembly-Rear Wheel; Hub, Rear Wheel
- Position: Rear
- Replaces: 26097430
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 GMC Sierra 3500 | Base, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
GMC Sierra 3500 Hub, Rear
Part Number: 15115915
Product Specifications
- Other Name: Hub, Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly
- Position: Rear
- Replaces: 26083838
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS

GMC Sierra 3500 Wheel Bearing

Our website offers an extensive catalog of genuine GMC Sierra 3500 Wheel Bearing at unbeatable prices. Every OEM GMC Sierra 3500 Wheel Bearing comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Sierra 3500 Wheel Bearing Parts Questions & Experts Answers

Output Shaft Bearing, Front
26066885
Q: How to service and repair the front wheel bearing on GMC Sierra 3500?
A: The process to service or repair front wheel bearings starts by hoisting your vehicle. First remove the tire together with the wheel then take off the rotor. Detach the Wheel Speed Sensor and brake hose mounting bracket bolt from the Steering Knuckle before removing the wheel drive shaft nut retaining cover. A brand-new nut needs to be used when you install the wheel drive shaft. The procedure requires removal of the wheel drive shaft assembly retaining nut and its accompanying washer. Start by using the axle remover (J 45859) to free the wheel drive shaft from the Wheel Hub and bearing. Remove first the 15-series bearing mounting bolts before taking out the 25/35 series mounting bolts. The vehicle receives a Wheel Hub separation followed by bearing extraction alongside splash shield extraction and an o-ring seal removal from the Steering Knuckle bore that operates through the 25/35 series. Test the o-ring seal by checking for nicks, cuts and dryness, brittleness and compression set. Replace the o-ring if damage occurs. Suspension professionals need to remove all contaminants and corrosion from the Steering Knuckle bore and the hub and bearing assembly before they lubricate the knuckle bore with Wheel Bearing grease or another equivalent product. Tighten the Wheel Speed Sensor mounting bolt to the Wheel Hub and bearing assembly until it reaches 18 nm (13 ft. Lbs.). Next install the o-ring to the Steering Knuckle, 25/35 series. After completing the Wheel Hub and bearing and splash shield installation on the vehicle, proceed to install the Wheel Hub and bearing and splash shield on the vehicle, 15 series. Both 15 series and 25/35 series Wheel Hub and bearing mounting bolts require a torque setting of 180 nm (133 ft. Lbs.) to fasten the Wheel Hub to the knuckle. Use nut along with washer to secure the wheel drive shaft assembly to Wheel Hub and bearing. Torque the nut to 240 nm (177 ft. Lbs.) before installing the Wheel Speed Sensor and brake hose mounting bracket bolt to Steering Knuckle then tighten brake hose clip bolt to 12 nm (106 inch lbs.). Finish setup by adding the rotor then installing tire and wheel and finally lowering the vehicle down.

Related GMC Sierra 3500 Parts

Browse GMC Sierra 3500 Wheel Bearing by Years

2006 2005 2004 2003 2002 2001