Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 9439561
Wheel Bearing

1984-2020 GM

Customer Questions & Expert Answers (24)
GM 9439561 Wheel Bearing
GM 9439561 Wheel Bearing
GM 9439561 Wheel Bearing
GM 9439561 Wheel Bearing
  • Part Description
    Rear Wheel Bearing; Axle Bearing
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$72.53 MSRP: $131.28
You Save: $58.75 (45%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Wheel Bearing Diagram for 9439561
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 9439561

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006, 1999-2000 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    1993-1996 Cadillac FleetwoodBase, Brougham8 Cyl 5.7 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1987-1994 Chevrolet BlazerBase, Cheyenne, Custom Deluxe, Scottsdale, Silverado, Silverado Sport8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
    1984-1986 Chevrolet C10Custom, Scottsdale, Silverado6 Cyl 4.1 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
    1984-1986 Chevrolet C10 SuburbanCustom, Scottsdale, Silverado8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
    1988-1999 Chevrolet C1500454 SS, Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Hey, is 9439561 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 9439561 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for the wheel drive shaft retaining nut for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Install the wheel drive shaft retaining nut, ensuring it is tightened to 250 N.m (184 lb ft).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What is the torque specification for securing the wheel hub and bearing mounting bolts for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Tighten the wheel hub to knuckle bolts to 180 Nm (133 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    How do you remove the right side seal or bearing for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Remove the inner axle shaft and housing assembly from the differential carrier case, followed by the clutch fork assembly components.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What should be done after installing the inner axle shaft for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Carefully tap the inner axle shaft into place, reassemble the inner axle shaft and clutch fork components, and reinstall the assembly to the differential carrier case.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What should be done after installing the wheel drive shaft retaining nut for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Attach the retainer and cotter pin to the wheel drive shaft nut.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What is the procedure for installation for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Ensure all parts are clean, grease the spindle at the inner and outer bearing seat, shoulder, and seal seat with approved high-temperature front wheel bearing grease.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What are the final steps after reattaching the wheel hub for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Reattach the wheel hub to the axle housing, install the adjusting nut with the J2222-C, adjust the wheel bearings, and then reinstall the axle shaft, brake drum, and tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What is the first step in the replacement process for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Begin by raising the vehicle and removing the tire and wheel assembly, followed by the hub and rotor assembly.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What is the first step to service and repair the front wheel bearing for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Begin by raising and supporting the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What components need to be detached from the steering knuckle for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Detach the wheel speed sensor and brake hose mounting bracket bolt.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What should be done with the O-ring seal from the steering knuckle bore for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Remove, clean, and inspect it, replacing it if there are any nicks, cuts, brittleness, or compression set.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What tools are required to service and repair the rear axle shaft seal or bearing for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    The required tools are: J 8092 Universal Driver Handle, J 21128 Axle Pinion Oil Seal Installer, J 23690 Bearing Installer, J 2619-01 Slide Hammer, and J 45857 Tone Wheel or Bearing Remover.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What components need to be detached from the steering knuckle for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Detach the wheel speed sensor and brake hose mounting bracket bolt.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What should be done after securing the new wheel hub and bearing for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Install the wheel drive shaft retaining nut, tightening it to 250 Nm (184 ft. lbs.), followed by the retainer and cotter pin to the wheel drive shaft nut.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What are the final steps before lowering the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Reinstall the rotor and the tire and wheel before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    How do you install the axle shaft bearing for the 2000 GMC C3500? Posted by Customer
    A:
    Use the Wheel Bearing Installer (J 29709) and the Universal Driver Handle (J 8092) to install the axle shaft bearing into the axle housing until the tool bottoms against the tube.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    How do you remove the seal only for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Use a suitable seal remover.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What components need to be detached from the steering knuckle for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Detach the wheel speed sensor and brake hose mounting bracket bolt.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What should be done before installing the axle shaft for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Lubricate the axle bearing and seal with wheel bearing lubricant.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What should be taken out for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Take out the wheel hub, bearing, and splash shield.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    How do you remove the right side seal or bearing for the 2006 GMC Yukon? Posted by Customer
    A:
    Remove the inner axle shaft and housing assembly from the differential carrier case, followed by the clutch fork assembly components.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    How is the axle shaft seal installed for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Install the axle shaft seal using either the J 21128 or J 29713, driving it into the bore until it is flush with the tube.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What is the first step to replace the rear wheel hub and bearing for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Wheel Bearing 9439561 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 9439561 Wheel Bearing is available in the market under the name GM Wheel Bearing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 9439561 Wheel Bearing fits certain Chevrolet C10, Tahoe, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Fleetwood, Escalade ESV and Hummer H2 models.
The original GM component designated by manufacturer part number 9439561 maintains top performance when functioning as the Rear Wheel Bearing; Axle Bearing unit at its Rear. The component 9439561 is constructed from durable material and its dimensions span 3.0 x 3.2 x 3.1 inches while weighing 1.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Axle Bearings; Shaft Bearings; Outer Bearing; Bearing; Bearing, Rear Axle Shaft; Bearing, Rear Wheel. The part 9439561 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.