How to replace the Crankshaft Position Sensor on GMC Yukon XL 1500?

To replace crankshaft position (CKP) sensor, make sure that ignition key is off or lock and all electrical loads are off; tool may contact live terminals, therefore always disconnect the negative Battery Cable throughout the tools to prevent injuries and damages. Start with lifting the vehicle and removing the Starter. Unplug the ckp sensor electrical connector and clean the surrounding of the sensor so that debris does not enter into the engine. Remove ckp sensor retaining fastener and then the ckp sensor it self. To install the ckp sensor put it in place, fastened with the retaining fastener, and tighten to 25 n.m (18 lb ft). As for the ckp sensor, you must reestablish the electrical connector to it, reinstall the Starter, lower the vehicle, and reattach the negative Battery Cable. Lastly, do the ckp system variation learn procedure.

OEM GMC Yukon XL 1500 Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Position Sensors found

View related parts
GMC Yukon XL 1500 Crankshaft Position Sensor
Part Number: 12703627
$58.96 MSRP: $105.28
You Save: $46.32 (44%)
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12585546
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 GMC Yukon XL 1500 | SLE, SLT | 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Crankshaft Position Sensor
Part Number: 12560228
$65.79 MSRP: $117.48
You Save: $51.69 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12555566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

GMC Yukon XL 1500 Crankshaft Position Sensor

Our website offers an extensive catalog of genuine GMC Yukon XL 1500 Crankshaft Position Sensor at unbeatable prices. Every OEM GMC Yukon XL 1500 Crankshaft Position Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Yukon XL 1500 Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Position Sensor
12560228
Q: How to replace the Crankshaft Position Sensor on GMC Yukon XL 1500?
A: To replace crankshaft position (CKP) sensor, make sure that ignition key is off or lock and all electrical loads are off; tool may contact live terminals, therefore always disconnect the negative Battery Cable throughout the tools to prevent injuries and damages. Start with lifting the vehicle and removing the Starter. Unplug the ckp sensor electrical connector and clean the surrounding of the sensor so that debris does not enter into the engine. Remove ckp sensor retaining fastener and then the ckp sensor it self. To install the ckp sensor put it in place, fastened with the retaining fastener, and tighten to 25 n.m (18 lb ft). As for the ckp sensor, you must reestablish the electrical connector to it, reinstall the Starter, lower the vehicle, and reattach the negative Battery Cable. Lastly, do the ckp system variation learn procedure.

Related GMC Yukon XL 1500 Parts

Browse GMC Yukon XL 1500 Crankshaft Position Sensor by Years

2009 2008 2007 2006 2005 2004 2003 2002 2001 2000