Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
| Page 1 of 6 |Next >
1-20 of 117 Results
GMC Yukon XL 1500 Door Handle
Our website offers an extensive catalog of genuine GMC Yukon XL 1500 Door Handle at unbeatable prices. Every OEM GMC Yukon XL 1500 Door Handle comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Yukon XL 1500 Door Handle Parts Questions & Experts Answers
Q: How to replace the front door exterior door handle on GMC Yukon XL 1500?
A: The first step in front door exterior handle replacement involves removing the trim panel with the water deflector. First unfasten the rod clip from the outside handle rod followed by the lock cylinder rod from its clip. Secure the handle using masking tape on the outside door before you begin to remove the outside handle mounting nuts. Starting from the outside of the handle housing you must remove the rubber cover to access the outboard nut. The Door Lock Cylinder can now be removed. The correct maintenance sequence for a fixable lock cylinder should be followed. Afterward connect the new handle components to the vehicle hardware. Before installing the Door Lock Cylinder into the outside handle housing it is necessary to coat the inside of the lock case and cylinder keyway with gm p/n 12345120 or canadian p/n 726548 lubricant. Fasten the lock cylinder clip onto the rod before connecting the accessory rod to the face of the handle assembly. After removing the tape from the Door Handle install the outside mounting nuts while tightening them to 9 n.m (80 lb in). Complete the installation process by placing back the rubber cover along with the water deflector and replaced the trim panel.