Make sure this part fits

GM 19299935
Handle, Outside

2000-2006 GM

Customer Questions & Expert Answers (11)
GM 19299935 Handle, Outside
  • Part Description
    Handle, End Gate Lock; Tailgate Handle
  • Replaces
    15029913, 15136048, 15136047, 15196404, 15750907, 15750911, 15136049, 15196406, 15744596, 15750906, 15750904, 15196405, 15041821, 15093919, 15093918
  • Manufacturer
    General Motors
Make sure this part fits
$80.68 MSRP: $120.09
You Save: $39.41 (33%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2006 Chevrolet Suburban 1500Base, LS, LT, LTZ, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2006 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2004-2006 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2006 GMC YukonDenali, SL, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2006 GMC Yukon XL 1500Denali, SL, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2006 GMC Yukon XL 2500SLE, SLT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19299935 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19299935 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the tailgate handle on Chevrolet Suburban 1500? Posted by Customer
    A:
    Starting the tailgate handle replacement requires opening the liftgate followed by removing the trim panel before proceeding. First detach the actuator cable assembly and remove nuts from the endgate section behind the handle assembly to extract the entire handle assembly. Secure the handle assembly to endgate positions by following the Fastener Notice in Service Precautions and fasten nuts on the handle assembly from endgate back while tightening bolts to 9 N.m (80 lb in). After reinstalling the liftgate trim panel you should connect the actuator cable assembly back to the handle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the tailgate handle on Chevrolet Suburban 2500? Posted by Customer
    A:
    The tailgate release handle on the avalanche requires initial bezel and linkage rod retainer removal from the Tailgate Handle before handle replacement. Begin with bolt removal from the handle's tailgate attachment and continue by disassembling the tailgate spoiler and extracting the handle. First install the new handle within the tailgate before tightening 3 bolts to 25 n.m (18 lb ft) torque. Reinstall the tailgate spoiler followed by handling the linkage rod reattachment before adjusting the Tailgate Latch. The Tailgate Handle bezel needs to be reinstalled during this step.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the tailgate handle on GMC Yukon XL 1500? Posted by Customer
    A:
    Starting the tailgate handle replacement requires opening the liftgate followed by removing the trim panel before proceeding. First detach the actuator cable assembly and remove nuts from the endgate section behind the handle assembly to extract the entire handle assembly. Secure the handle assembly to endgate positions by following the Fastener Notice in Service Precautions and fasten nuts on the handle assembly from endgate back while tightening bolts to 9 N.m (80 lb in). After reinstalling the liftgate trim panel you should connect the actuator cable assembly back to the handle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the rear door exterior handle for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    First, remove the trim panel and pull back the water deflector as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be followed for coding a new lock cylinder for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Follow the necessary coding procedures for coding a new lock cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the purpose of removing the nuts from the back of the endgate for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    It allows for the removal of the handle assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Handle
    Q:
    What is the next step after removing the door lock cylinder for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Install the new handle onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you release the handle bezel tab retainers for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Use a flat-bladed tool to insert it between the door handle bezel and the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What additional components may need to be disconnected for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    If required, disconnect the electrical connector and remove the actuator cable along with the door lock cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear door exterior handle for the 2006 GMC Yukon? Posted by Customer
    A:
    Begin by removing the trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle, Outside 19299935 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19299935 Handle, Outside is available in the market under the name GM Door Handle, Tailgate Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19299935 Handle, Outside fits certain Chevrolet Tahoe, Suburban 1500, Suburban 2500 models, as well as GMC Yukon, Yukon XL 1500, Yukon XL 2500 models.
The original GM component designated by manufacturer part number 19299935 maintains top performance when functioning as the Handle, End Gate Lock; Tailgate Handle unit. The component 19299935 is constructed from durable material and its dimensions span 9.9 x 5.4 x 5.4 inches while weighing 0.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 19299935 has available replacement options 15029913, 15136048, 15136047, 15196404, 15750907, 15750911, 15136049, 15196406, 15744596, 15750906, 15750904, 15196405, 15041821, 15093919, 15093918. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.