How to replace the rear door window motor on GMC Yukon XL 1500?

The first step to replace the rear door Window Motor requires users to raise the window but requires window removal when the motor becomes nonoperable to access retention screws. The window support procedure begins by taking out the door trim panel along with the water deflector together with the door speaker. Disconnect the wiring harness at the Window Motor after which remove the 3 bolts (115 001 01) connected to the motor from its front side but keep the cable gear inside the housing to prevent cable spool failure. Separate the Window Motor from the cable housing by wiggling it while paying attention to its orientation before removing it from the Window Regulator assembly. Installation requires a new motor to be gently fitted into the cable housing before tightening the three bolts (115 001 01) to 5 n.m (44 lb in). To reintegrate the window you should first install it and then connect the wiring harness to the Window Motor. The first step is to remove the window support while connecting the wire connector to the switch to examine the window operation. Assessment complete, disconnect the wiring harness. Conclude by putting back the speaker and water deflector system followed by the door trim panel.

OEM GMC Yukon XL 1500 Window Motor

Window Lift Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Window Motors found

View related parts
GMC Yukon XL 1500 Window Motor, Front Driver Side
Part Number: 19179943
$53.45 MSRP: $95.43
You Save: $41.98 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Front Side Door Window Regulator; Motor Kit, Door And End Gate Electrical; Motor Kit, Front Door Window Regulator; Motor Kit, Rear Door Window Regulator
- Position: Front Driver Side
- Replaces: 88981018
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Window Motor, Front Passenger Side
Part Number: 19179942
$53.45 MSRP: $95.43
You Save: $41.98 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Front Side Door Window Regulator; Motor Kit, Door And End Gate Electrical; Motor Kit, Front Door Window Regulator; Motor Kit, Rear Door Window Regulator
- Position: Front Passenger Side
- Replaces: 88981019
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Motor
Part Number: 23142260
$231.71 MSRP: $415.62
You Save: $183.91 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Door And End Gate Electrical; Motor, Rear Compartment Lid Release Or Ajar
- Replaces: 25882453
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2014 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 6.2 L FLEX
View related parts
GMC Yukon XL 1500 Transmission
Part Number: 25889602
$164.38 MSRP: $294.86
You Save: $130.48 (45%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Motor, Door And End Gate Electrical; Motor; Motor, Rear Compartment Lid Release Or Ajar
- Replaces: 15299403
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon XL 1500 Window Motor
Part Number: 89044536
Product Specifications
- Other Name: Motor Assembly, Rear Side Door Window Regulator-Left-Hand; Motor
- Position: Rear Driver Side
- Replaced by: 19208468
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Window Motor, Passenger Side
Part Number: 19208467
Product Specifications
- Other Name: Motor, Door And End Gate Electrical; Window Regulator; Motor
- Position: Passenger Side
- Replaces: 89044537, 88937200
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Window Motor, Rear Driver Side
Part Number: 88937199
Product Specifications
- Other Name: Motor Assembly, Rear Side Door Window Regulator-Left-Hand; Motor; Motor, Door And End Gate Electrical
- Position: Rear Driver Side
- Replaced by: 19208468
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

GMC Yukon XL 1500 Window Motor

Our website offers an extensive catalog of genuine GMC Yukon XL 1500 Window Motor at unbeatable prices. Every OEM GMC Yukon XL 1500 Window Motor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Yukon XL 1500 Window Motor Parts Questions & Experts Answers

Window Motor, Passenger Side
19208467
Q: How to replace the rear door window motor on GMC Yukon XL 1500?
A: The first step to replace the rear door Window Motor requires users to raise the window but requires window removal when the motor becomes nonoperable to access retention screws. The window support procedure begins by taking out the door trim panel along with the water deflector together with the door speaker. Disconnect the wiring harness at the Window Motor after which remove the 3 bolts (115 001 01) connected to the motor from its front side but keep the cable gear inside the housing to prevent cable spool failure. Separate the Window Motor from the cable housing by wiggling it while paying attention to its orientation before removing it from the Window Regulator assembly. Installation requires a new motor to be gently fitted into the cable housing before tightening the three bolts (115 001 01) to 5 n.m (44 lb in). To reintegrate the window you should first install it and then connect the wiring harness to the Window Motor. The first step is to remove the window support while connecting the wire connector to the switch to examine the window operation. Assessment complete, disconnect the wiring harness. Conclude by putting back the speaker and water deflector system followed by the door trim panel.