Make sure this part fits

GM 1996835
Door Actuator

1996-2024 GM

Customer Questions & Expert Answers (34)
GM 1996835 Door Actuator
GM 1996835 Door Actuator
  • Part Description
    Actuator, Air Inlet Valve; HVAC Heater Blend Door Actuator
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number1996835
    Part DescriptionActuator, Air Inlet Valve; HVAC Heater Blend Door Actuator
    Other NamesActuator; Actuator, A/C Vacuum Control
    Item Dimensions5.9 x 5.6 x 5.5 inches
    Item Weight0.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU1996835
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 Chevrolet Express 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 Chevrolet Express 3500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    1996-1999 Chevrolet P30Base6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2014 GMC Savana 1500Base, LS, LT, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 GMC Savana 2500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 GMC Savana 3500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 1996835 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 1996835 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after disconnecting the electrical connector for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Remove the retaining screws and take out the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you install the new actuator for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Position the actuator back onto the heater assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the final step in the process for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Reinstall the IP carrier to the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after positioning the defrost actuator for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Reconnect the vacuum hose to the defrost actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after removing the heater assembly for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Take out the retaining screws from the auxiliary mode actuator and then remove the actuator itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after securing the actuator for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Reconnect the air temperature electrical connector to the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after removing the I/P upper trim pad for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Disconnect the vacuum hose from the defrost actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to replace the Auxiliary Temperature Valve Actuator for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Begin by removing the left rear quarter trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How should the actuator be secured for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Secure it with the retaining screws, ensuring they are tightened to 1.9 N.m (17 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you remove the defrost actuator from the heater assembly for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Depress the clip to remove the defrost actuator from the heater assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after removing the I/P upper trim pad for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Disconnect the vacuum hose from the defrost actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the final step in the installation process for the 2006 Chevrolet Express 3500? Posted by Customer
    A:
    Reinstall the I/P upper trim pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the final step in the process for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Reinstall the left rear quarter trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the next step after removing the actuator for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Position the new air temperature actuator and install the retaining screws, tightening them to 1.9 Nm (17 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after disconnecting the electrical connector for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the retaining screws and take the actuator out from the heater assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the final step in the replacement process for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Reinstall the left rear quarter trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the next step after disconnecting the electrical connector for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Remove the retaining screws and take out the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after removing the left rear quarter trim panel for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Disconnect the electrical connector from the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you install the new auxiliary mode actuator for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Begin by placing the new auxiliary mode actuator in position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step in the installation process of the new auxiliary mode actuator for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Place the new auxiliary mode actuator in position, ensuring to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you install the new air temperature actuator for the 2010 GMC Savana 3500? Posted by Customer
    A:
    Position the air temperature actuator back onto the heater assembly, ensuring to follow fastener caution to avoid vehicle damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you install the new air temperature actuator for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Position the new air temperature actuator and secure it with the retaining screws, tightening them to 1.9 N.m (17 lb in) as per the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after removing the instrument panel for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Disconnect the vacuum hose from the defrost actuator by depressing the clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the final step after installing the actuator for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Reconnect the air temperature actuator electrical connector and reinstall the passenger side knee bolster.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How should the evaporator inlet and outlet tubes be reattached for the 2010 GMC Savana 2500? Posted by Customer
    A:
    Install new sealing washers to the evaporator inlet and outlet tubes, then attach the evaporator inlet tube to the evaporator and tighten the retaining nut to 16 Nm (12 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after disconnecting the electrical connector for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Remove the retaining screws and take out the air temperature actuator from the heater assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the next step after removing the retaining screws for the 2001 GMC Savana 1500? Posted by Customer
    A:
    Take out the air temperature actuator from the HVAC module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to replace the defroster actuator for the 2005 GMC Savana 3500? Posted by Customer
    A:
    Begin by removing the I/P upper trim pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to replace the Auxiliary Mode Valve Actuator for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Remove the auxiliary HVAC module assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after disconnecting the electrical connector for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Remove the retaining screws and take out the air temperature actuator from the heater assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you secure the actuator during installation for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Secure it with the two retaining screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step in the installation process for the 2010 GMC Savana 2500? Posted by Customer
    A:
    Attach the defrost actuator to the heater assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to replace the Air Temperature Actuator (Auxiliary) for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Remove the left rear quarter trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 1996835, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 1996835 Door Actuator. It is sometimes referred to as GM Blend Door Actuator. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 1996835 Door Actuator. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery