Make sure this part fits

GM 10393075
Actuator

2005-2011 GM

Customer Questions & Expert Answers (11)
GM 10393075 Actuator
GM 10393075 Actuator
  • Part Description
    Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator
  • Manufacturer
    General Motors
Make sure this part fits
$37.02 MSRP: $109.57
You Save: $72.55 (67%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Chevrolet CobaltBase, LS, LT, LTZ, Sport, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2006-2011 Chevrolet HHRLS, LS Panel, LT, LT Panel, SS, SS Panel4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
    2007-2009 Pontiac G5Base, GT4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10393075 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10393075 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Blend Door Actuator on Chevrolet HHR? Posted by Customer
    A:
    To replace the air-temperature actuator, one should begin by removing the Fuse labeled hvac ctrl (BATT) and knee bolster reinforcement. Next, remove the instrument panel (I/P) tie bar. Depress the air temperature actuator electrical connector. Remove the screws that are holding the air temperature actuator in the place and after that take out the actuator itself. And for installation, make sure the key is off when you're working with the electrical connectors to ensure proper calibration. Mount the air temperature actuator and then screws with the torque of 2.2 n.m (19 lb in). Reconnect the electrical connector of the actuator to measure the air temperature and reinstall the tie bar for the i/p and the reinforcement for the knee bolster. Finally, change the Fuse marked hvac ctrl (BATT). Don't tamper with any controls on the hvac control assembly so as to prevent the wrong performance of hvac and start the engine allowing it to run for a minute.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Blend Door Actuator on Chevrolet Cobalt? Posted by Customer
    A:
    To replace the temperature valve actuator, you will have to first remove the Fuse that is termed hvac ctrl (BATT) and the steering column filler panel. Pull off the air temperature actuator electrical connector and unscrew the air temperature actuator with screws to remove the actuator itself. For the installation, ensure that the key has the off position when the electrical connectors are connecting to ensure the correct calibration. Mount the air temperature actuator observing fastener precautions and fasten it with the help of screws tightened to 2.2 nm (19 lb in). Reconnect the air temperature actuator electrical connector and reinstall the steering column filler panel after reinstalling the hvac ctrl (BATT) Fuse. Do not touch any controls on the hvac control assembly while calibrating it, in order to prevent the attendant from performing ineffectively then the engine must be started up and run for one minute.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be avoided during calibration for the 2007 Chevrolet Cobalt? Posted by Customer
    A:
    Avoid adjusting any controls on the HVAC control assembly to prevent improper HVAC performance.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How should the recirculation actuator be installed for the 2010 Chevrolet Cobalt? Posted by Customer
    A:
    Install the recirculation actuator, then secure it with the screw, tightening it to 2.2 Nm (19 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How should the actuator be secured during installation for the 2005 Chevrolet Cobalt? Posted by Customer
    A:
    Secure the actuator with screws, tightening them to 2.2 N.m (19 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step in the installation of the new air temperature actuator for the 2006 Chevrolet Cobalt? Posted by Customer
    A:
    Position the new air temperature actuator and ensure the key is in the OFF position when connecting the electrical connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How should the actuator be secured during installation for the 2006 Chevrolet HHR? Posted by Customer
    A:
    Secure the actuator with screws, tightening them to 2.2 N.m (19 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be avoided during calibration for the 2009 Chevrolet HHR? Posted by Customer
    A:
    Avoid adjusting any controls on the HVAC control assembly to prevent improper HVAC performance.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to replace the Air Inlet Valve Actuator for the 2010 Chevrolet HHR? Posted by Customer
    A:
    Remove the fuse labeled HVAC CTRL (BATT) and the instrument panel (I/P) retainer, followed by the I/P tie bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the final step in the replacement process for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Reinstall the fuse labeled HVAC CTRL (BATT).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Actuator 10393075 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10393075 Actuator is available in the market under the name GM Blend Door Actuator. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10393075 Actuator fits certain Chevrolet Cobalt, HHR models, as well as Pontiac G5 models.
The original GM component designated by manufacturer part number 10393075 maintains top performance when functioning as the Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator unit. The component 10393075 is constructed from durable material and its dimensions span 4.3 x 4.1 x 2.1 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Actuator, A/C Control. The part 10393075 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.