Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 10371696
Wiper Arm, Passenger Side

1997-2005 GM

Customer Questions & Expert Answers (7)
GM 10371696 Wiper Arm, Passenger Side
GM 10371696 Wiper Arm, Passenger Side
GM 10371696 Wiper Arm, Passenger Side
  • Part Description
    Arm, Windshield Wiper Arm
  • Position
    Passenger Side
  • Replaces
    22625118, 22616390, 22610328, 22647238
  • Manufacturer
    General Motors
Make sure this part fits
$90.36 MSRP: $119.65
You Save: $29.29 (25%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 10371696 Wiper Arm, Passenger Side is Ref No. 1 in the diagram below

    1997 Oldsmobile Cutlass Wiper Arm, Passenger Side Diagram for 10371696
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 10371696

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    1997-2003 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    1997-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 10371696 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10371696 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wiper arm on Chevrolet Classic? Posted by Customer
    A:
    You need to start by putting the Ignition Switch to accy mode while setting the Wiper Switch at pulse. Switch off the ignition once you move both wiper arms to innerwipe mode where they stop moving. Unplug the washer hose from the Wiper Arm before removing the protective cover and the Wiper Arm nut itself. Use the Wiper Arm puller tool part j 39822 to remove the Wiper Arm from its connection to the wiper transmission drive shaft. Afterwards, take off the Wiper Blade from the Wiper Arm. First attach the Wiper Blade to the Wiper Arm before inserting the Wiper Arm onto the wiper transmission drive shaft. To confirm the operation of the windshield wiper system position the ignition selector to accy and wiper toggle to pulse. When leaving the vehicle turn off the engine at the same time as putting the wipers in their stationary position. This alignment matches the park position. Mount the Wiper Arm onto the wiper transmission drive shaft with proper placements for both end positions: keep the driver side lh blade tip 47 mm (1.85 in) from the windshield base and position the passenger side rh Wiper Arm 90 mm (3.54 in) away. When measuring distance keep the tool straight as 90 degrees to Wiper Blade surface. After attaching all parts you need to install the Wiper Arm nut and keep it tight at 30 n.m. Next connect the wiper cover and reassemble the water hose to the Wiper Arm.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the wiper arm on Chevrolet Malibu? Posted by Customer
    A:
    Before working on the Wiper Arm you need to mark where the blade rests on the windshield before lifting the hood and disconnecting the washer hose. Pull off the outer cover to reach the Wiper Arm nut. Disconnect the nut from its place. When Wiper Arm rocking fails to break the Drive Shaft bond, a battery terminal puller should be used to remove it. Shake the Wiper Arm to disconnect it from the Drive Shaft and brush off the Drive Shaft knurls using a wire brush. Line up the Wiper Arm over the position mark then install it onto the Drive Shaft. Place the Drive Shaft nut then fasten it to 25 n.m (18 lb ft) torque. Finally attach the washer hose cover and Drive Shaft nut. Lower the hood first then remove the windshield marker before testing the wiper operation.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you ensure the windshield wiper system operates during installation for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Set the ignition switch to the ACCY position and the wiper switch to the PULSE position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be removed from the wiper arm before using the Wiper Arm Puller for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Remove the cover from the wiper arm nut and the wiper arm nut itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should you do once the wiper arm is loosened for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Rock the wiper arm back and forth to detach it from the drive shaft and then remove it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How should the measuring device be held when measuring the distances for the 2003 Chevrolet Malibu? Posted by Customer
    A:
    The measuring device should be held at 90 degrees to the wiper blade.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Wiper Arm, Passenger Side 10371696 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10371696 Wiper Arm, Passenger Side is available in the market under the name GM Windshield Wiper, Wiper Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10371696 Wiper Arm, Passenger Side fits certain Chevrolet Malibu, Classic models, as well as Oldsmobile Cutlass models.
The original GM component designated by manufacturer part number 10371696 maintains top performance when functioning as the Arm, Windshield Wiper Arm unit at its Passenger Side. The component 10371696 is constructed from durable material and its dimensions span 26.3 x 8.3 x 1.3 inches while weighing 1.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 10371696 has available replacement options 22625118, 22616390, 22610328, 22647238. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.