Make sure this part fits

GM 12588410
Serpentine Belt

1999-2005 GM

Customer Questions & Expert Answers (12)
GM 12588410 Serpentine Belt
  • Part Description
    Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt
  • Replaces
    24507815, 12569377
  • Manufacturer
    General Motors
Make sure this part fits
$29.50 MSRP: $55.42
You Save: $25.92 (47%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2000-2005 Chevrolet ImpalaBase6 Cyl 3.4 L GAS
    2000-2001 Chevrolet LuminaBase6 Cyl 3.1 L GAS
    2000-2005 Chevrolet Monte CarloLS, LS Competition, LS Sport6 Cyl 3.4 L GAS
    1999-2003 Pontiac Grand PrixSE6 Cyl 3.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12588410 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12588410 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the drive belt on Chevrolet Lumina? Posted by Customer
    A:
    Operations on the Drive Belt require starting with disconnecting the battery ground (negative) cable. Operate a 3/8-inch breaker bar to raise the Drive Belt tensioner away from the Drive Belt before you can remove both components. The first step for installation involves placing the Drive Belt in position before checking that both the Drive Belt itself and its Drive Belt system align with the correct grooves of the accessory Drive Belt pulleys. Start by positioning the Drive Belt correctly at the Drive Belt tensioner pulley after rotating or lifting this pulley with a 3/8-inch breaker bar. The last step involves checking the Drive Belt length scale on the Drive Belt tensioner for a proper installed length before reattaching the battery ground (negative) cable.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be checked after installing the new drive belt for the 2001 Buick Century? Posted by Customer
    A:
    Ensure the drive belt is properly routed and inspect the drive belt length scale on the drive belt tensioner to confirm the correct installed length.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Belt
    Q:
    What is the next step after placing the new drive belt for the 2003 Buick Century? Posted by Customer
    A:
    Install the drive belt under the drive belt tensioner pulley by lifting or rotating the tensioner again with the 3/8 inch breaker bar, making sure the belt is properly routed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Belt
    Q:
    What should you check after installing the drive belt for the 2002 Buick Century? Posted by Customer
    A:
    Finally, check the drive belt length scale on the drive belt tensioner to confirm the correct installed length.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Belt
    Q:
    What should you confirm after routing the drive belt for the 2000 Buick Century? Posted by Customer
    A:
    Confirm that the drive belt is properly routed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Belt
    Q:
    How do you install the new drive belt for the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    Place the drive belt onto all pulleys except the generator pulley.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Belt
    Q:
    What is the first step to service and repair the accessory drive belt for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Rotate the drive belt tensioner using a 15-mm box end wrench on the pulley nut and then remove the drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Belt
    Q:
    How do you install the new drive belt for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    Place the drive belt onto all pulleys except the generator pulley, then rotate the drive belt tensioner to position the drive belt over the generator pulley.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Belt
    Q:
    What is the next step after placing the drive belt on the pulleys for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Rotate the drive belt tensioner to position the drive belt over the generator pulley, ensuring proper routing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Belt
    Q:
    How do you replace the drive belt (L32) for the 2004 Chevrolet Impala? Posted by Customer
    A:
    First, rotate the drive belt tensioner using a 15-mm box end wrench on the pulley nut and then remove the drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Belt
    Q:
    How do you release pressure on the drive belt for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Rotate the drive belt tensioner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Belt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Serpentine Belt 12588410 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12588410 Serpentine Belt is available in the market under the name GM Drive Belt. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12588410 Serpentine Belt fits certain Chevrolet Impala, Lumina, Monte Carlo models, as well as Buick Century. Additionally, it is compatible with Pontiac Grand Prix models.
The original GM component designated by manufacturer part number 12588410 maintains top performance when functioning as the Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt unit. The component 12588410 is constructed from durable material and its dimensions span 4.2 x 16.6 x 1.1 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 12588410 has available replacement options 24507815, 12569377. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.