GM 15757007
Blade Assembly

Set the Wiper Arm in a vertical position by lifting it before it returns to hit your windshield. After pushing the locking tab on the Wiper Blade tab you should pull the Wiper Arm down while pulling on the Wiper Arm to separate it from its inner position and then remove the Wiper Arm completely. You should place the Wiper Arm hook into its opening on the Wiper Blade and guide the Wiper Blade to the inside radius hook on the Wiper Arm. Press down to set the locking tab in the slot on the wiper hook then slowly put the Wiper Arm with blade onto the windshield.

You can remove the wiper blade rubber from its position by lifting the tip to reveal the securing tab. Put your fingers in and pull the rubber down the entire spindle until it leaves the wiper assembly. You can install the wiper blade by passing it all the way through the wiper assembly until it connects and locks firmly into position.

First you must lift the Wiper Arm vertically so it locks before putting on a new Wiper Blade to stop it from hitting the windshield. Push the locking tab to release the Wiper Blade. At the same time, draw the Wiper Arm downward to disconnect the blade. Slide the arm out from its Wiper Arm base. Set the Wiper Blade on the Wiper Arm and push its hook through the release at the Wiper Blade. Align the blade with the small radius of the Wiper Arm hook. Push the Wiper Arm up until its locking slot fits into the hook part and lower it slowly onto the windshield glass.

You must first lift the Wiper Arm away from the window to replace its rear blade making sure it does not hit the windshield by accident. Depress the locking tab on the Wiper Blade clip then pull down to disconnect it. Take out the Wiper Blade pivot from the inner area of the arm and move the Wiper Arm out through the Wiper Blade gap. To set up the Wiper Blade insert it through the slot in the Wiper Blade then fit the blade inside the hook's center before pulling up until the mounting tab clicks in its slot. Slowly place the Wiper Arm and blade onto the window section.

The first step to replace the rear Wiper Blade demands that you lift the Wiper Arm away from the window while protecting the glass from damage. Push the locking tab of the Wiper Blade clip inward and pull it down to take out the Wiper Blade. Release the Wiper Blade pivot from its position at the inside of the Wiper Arm and feed the arm through the opening in the Wiper Blade. Place the wiper hook into the blade opening then measure the inside radius of the Wiper Arm. Then push the Wiper Blade onto the hook until the pivot locking tab connects to the slot. Slowly place the Wiper Arm and blade onto the car window.

Before replacing the rear Wiper Blade you need to lift it off the window while preventing it from falling and hitting the glass. After pressing the locking tab on the wiper clip, you can remove the Wiper Blade by pulling it down. Unhook the Wiper Blade pivot from inside the Wiper Arm by moving it past the Wiper Arm interior. Then guide the Wiper Arm through the Wiper Blade opening. Put the Wiper Arm hook through the new Wiper Blade opening before positioning the blade in the hole of the Wiper Arm inner radius. Turn the Wiper Arm upwards as you insert the locking tab until it clicks into place on the hook before letting the tool softly lower the blade to the window.

Before working on the Wiper Blade you need to lift the Wiper Arm until it finds its fixed position along the vertical axis to protect the windshield. When ready push down on the Wiper Blade clip's locking tab to free the Wiper Blade. Pull the blade down from its position on the Wiper Arm and slide the whole arm outside through the opening in the Wiper Blade. Position the Wiper Blade over the opening and feed the Wiper Arm hook through to mount the assembly in the correct inner radius of the Wiper Arm. Push the Wiper Arm upward to have the locking tab fit the hook slot before placing it properly on the windshield.

Engage the bottom claw of the wiper blade into the notches in the wiper blade element.

Slide the wiper blade assembly onto the wiper arm hook until the release tab clicks into place and locks, then gently lower the wiper arm to its normal position on the windshield.

Lift the wiper arm off the window, ensuring it does not fall back and strike the glass.