Make sure this part fits

GM 25731523
Pressure Valve

1996-2002 GM

Customer Questions & Expert Answers (7)
GM 25731523 Pressure Valve
GM 25731523 Pressure Valve
  • Part Description
    Valve, Electronic Brake Control; ABS Pump And Motor Assembly; ABS Control Module
  • Replaces
    25641265
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25731523
    Part DescriptionValve, Electronic Brake Control; ABS Pump And Motor Assembly; ABS Control Module
    Other NamesModulator Valve; ABS Pump Assembly; Pressure Modulator Valve; ABS Regulator; Modulator
    Item Dimensions8.6 x 8.3 x 6.2 inches
    Item Weight9.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces25641265
    ManufacturerGeneral Motors
    SKU25731523
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-1999 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    1996-1999 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    1997-1999 Cadillac DeVilleBase, Concours, d'Elegance8 Cyl 4.6 L GAS
    1997-2002 Cadillac EldoradoBase, ESC, ETC8 Cyl 4.6 L GAS
    1997 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
    1996-1999 Oldsmobile 8850th Anniversary Edition, Royale, Royale LS6 Cyl 3.8 L GAS
    1996 Oldsmobile 98Regency Elite6 Cyl 3.8 L GAS
    1996-1999 Oldsmobile LSSBase6 Cyl 3.8 L GAS
    1997-1998 Oldsmobile RegencyBase6 Cyl 3.8 L GAS
    1996-1999 Pontiac BonnevilleSE, SSE, SSEi6 Cyl 3.8 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25731523 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25731523 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the installation process for the 2001 Cadillac Eldorado? Posted by Customer
    A:
    Reinstall the air deflector shield and the left front fascia extension, lower the vehicle, tighten the 2 upper EBCM to BPMV bolts to 5 Nm (40 inch lbs.), install the EBCM electrical connector ensuring the connector tab is locked down, and perform the ABS Diagnostic System Check.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    How do you install the new proportioning valve for the 2002 Cadillac Eldorado? Posted by Customer
    A:
    Install the left or right proportioning valve/valves into the brake pipe and tighten the brake pipe fittings to 15 Nm (11 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Proportioning Valve
    Q:
    What is the next step after removing the EBCM connector for the 2000 Cadillac Eldorado? Posted by Customer
    A:
    Remove the front insulator and its mounting bolt, followed by the 2 upper EBCM to BPMV bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What should be done after locating the proportioning valves for the 2001 Cadillac Eldorado? Posted by Customer
    A:
    Remove the left or right proportioning valve/valves from the brake pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Proportioning Valve
    Q:
    What must be done if the Electronic Brake Control Module (EBCM) is faulty for the 2002 Cadillac Eldorado? Posted by Customer
    A:
    The EBCM must be replaced as an assembly, as it cannot be repaired.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What should be done during the installation of the proportioning valve for the 2000 Cadillac Eldorado? Posted by Customer
    A:
    Place the proportioning valve back into the brake line and tighten the fittings to 15 Nm (11 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Proportioning Valve
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25731523, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25731523 Pressure Valve. It is sometimes referred to as GM ABS Control Module, GM Brake Proportioning Valve. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25731523 Pressure Valve. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery