Make sure this part fits

GM 22846479
Negative Cable

2007-2014 GM

Customer Questions & Expert Answers (11)
GM 22846479 Negative Cable
  • Part Description
    Cable Assembly-Auxiliary Battery Negative
  • Replaces
    15888242, 25876896
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number22846479
    Part DescriptionCable Assembly-Auxiliary Battery Negative
    Other NamesCable, Battery Negative And Engine Ground
    Item Dimensions11.4 x 11.1 x 3.8 inches
    Item Weight1.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15888242, 25876896
    ManufacturerGeneral Motors
    SKU22846479
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2014 Cadillac EscaladeBase, Luxury, Platinum, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2014 Chevrolet TahoeLS, LT, LTZ8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2014 GMC YukonDenali, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22846479 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22846479 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after repositioning the junction block for the 2008 Cadillac Escalade? Posted by Customer
    A:
    Remove the positive battery cable connector from the underhood bussed electrical center (UBEC).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the last step in the process for the 2010 Cadillac Escalade? Posted by Customer
    A:
    Install the underhood junction block cover and the upper intake manifold sight shield, then reconnect the negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the installation process if the negative battery cable was replaced for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Install the battery current sensor if equipped, then install the negative battery cable to the vehicle accordingly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be done after attaching the positive battery cable terminal for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Reinstall the positive battery cable channel and clips on the plenum front panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be done with the junction block retainers for the 2010 Chevrolet Tahoe? Posted by Customer
    A:
    Lift the junction block retainers from the locked position and rotate them to the open position before removing the junction block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be done after raising it again for the 2010 Chevrolet Tahoe? Posted by Customer
    A:
    Install the negative battery cable clip to the chassis harness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be removed after disconnecting the cables for the 2010 GMC Yukon? Posted by Customer
    A:
    Remove the negative battery cable clip from the auxiliary bussed electrical center (BEC) and the negative battery cable ground terminal bolt from the left side engine block boss.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the first step to replace the battery positive cable for the 2010 GMC Yukon? Posted by Customer
    A:
    Disable the high voltage system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the first step to disconnect the negative battery cable for the 2010 GMC Yukon? Posted by Customer
    A:
    Ensure all lamps and accessories are turned off, then turn the ignition OFF without pausing at ACCESSORY and remove the ignition key.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    How do you secure the negative battery cable for the 2009 GMC Yukon? Posted by Customer
    A:
    Install the negative battery cable onto the battery terminal and tighten the negative cable nut to 5 Nm (44 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 22846479, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 22846479 Negative Cable. It is sometimes referred to as GM Battery Cable. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 22846479 Negative Cable. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery