Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 18026149
Caliper, Rear Driver Side

1997-2005 GM

Customer Questions & Expert Answers (10)
GM 18026149 Caliper, Rear Driver Side
  • Part Description
    Caliper Kit, Rear Brake; Brake Caliper
  • Position
    Rear Driver Side
  • Replaces
    18025476
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 18026149 Caliper, Rear Driver Side is Ref No. 8 in the diagram below

    1997 Oldsmobile Bravada Caliper, Rear Driver Side Diagram for 18026149
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 18026149

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1997-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1997-2001 GMC JimmyDiamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1997-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1997-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 18026149 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 18026149 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear brake calipers bracket on GMC Jimmy? Posted by Customer
    A:
    The replacement of the rear Brake Caliper Bracket requires users to start by draining 2/3 of the brake fluid from the master cylinder followed by vehicle elevation along with support. You should inspect caliper operation after tire wheel removal. Use this sequence to take out the caliper brackets then unscrew its bolts followed by unfastening the caliper bracket from its mounting position. After inspection of both caliper and caliper bracket you should install the caliper bracket to the mounting plate and tighten caliper bracket bolts to 70 nm (52 ft. Lbs.). Then you can install the caliper then put back the tire and wheel before removing the safety stands and lowering the vehicle. Use the Brake Pedal to achieve about two-thirds of its available range when the engine is in the off position followed by a gradual release of pressure. Continuously repeat the preceding methods for 15 seconds to create a firm Brake Pedal until the brake caliper pistons and pads correctly position. Before finishing the brake master cylinder installation you need to make sure it reaches the correct fluid mark.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be repeated for the remaining piston for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    The lubrication and installation process.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the front brake caliper piston seal be removed for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Using a non-metallic tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the front brake caliper piston seal be removed for the 2002 Chevrolet S10? Posted by Customer
    A:
    Using a non-metallic tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be applied to the brake caliper bolts for the 2002 Chevrolet S10? Posted by Customer
    A:
    Apply high-temperature silicone brake lubricant, avoiding the brake pad hardware.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How can excessive brake fluid loss and contamination be prevented for the 2002 Chevrolet S10? Posted by Customer
    A:
    Plug the opening in the front brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the final step in the assembly process for the 2000 GMC Jimmy? Posted by Customer
    A:
    Install the bleeder valve into the caliper housing and tighten it to 7 Nm (62 inch lbs.), followed by the installation of the bleeder valve cap.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be checked if necessary during installation for the 2001 GMC Jimmy? Posted by Customer
    A:
    If necessary, remove the front brake caliper and file the ends of the steering knuckle to obtain the proper clearance, checking for damage if the total clearance exceeds the specified range.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should you do if the fluid level is higher than midway for the 2003 GMC Sonoma? Posted by Customer
    A:
    Use an appropriate tool to reduce it to the midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Caliper, Rear Driver Side 18026149 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 18026149 Caliper, Rear Driver Side is available in the market under the name GM Brake Caliper Repair Kit, Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 18026149 Caliper, Rear Driver Side fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 18026149 maintains top performance when functioning as the Caliper Kit, Rear Brake; Brake Caliper unit at its Rear Driver Side. The component 18026149 is constructed from durable material and its dimensions span 8.2 x 8.9 x 6.5 inches while weighing 3.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Caliper Kit, Wheel Brake Cylinder/Caliper. The part 18026149 has available replacement options 18025476. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.