Make sure this part fits

GM 18026150
Caliper, Rear Passenger Side

1997-2005 GM

Customer Questions & Expert Answers (10)
GM 18026150 Caliper, Rear Passenger Side
  • Part Description
    Caliper Kit, Rear Brake; Brake Caliper
  • Position
    Rear Passenger Side
  • Replaces
    18025477
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1997-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1997-2001 GMC JimmyDiamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1997-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1997-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 18026150 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 18026150 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for installing the bleeder valve for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Tighten it to 12 Nm (110 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step to overhaul the rear brake caliper (15 Series) for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Remove the brake caliper from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be used to cover the brake caliper for the 2002 Chevrolet S10? Posted by Customer
    A:
    A shop rag.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after removing the tire and wheel assembly for the 2002 Chevrolet S10? Posted by Customer
    A:
    Next, detach the brake hose from the brake caliper bolt, ensuring to discard any metal gaskets that may be stuck to the caliper or hose end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the final step in the installation process for the 2002 Chevrolet S10? Posted by Customer
    A:
    Fill the brake master cylinder to the proper level, bleed the brake calipers, reattach the tire and wheel assembly, and finally lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after installing the piston seals for the 2000 GMC Jimmy? Posted by Customer
    A:
    Install the boot seals on the pistons and then place the pistons into the caliper bores.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after lubricating the sleeves and bushings for the 2003 GMC Sonoma? Posted by Customer
    A:
    Install the rubber O-ring bushings and brake caliper mounting bolt sleeves.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step in replacing the front brake caliper for the 2001 GMC Jimmy? Posted by Customer
    A:
    Begin by removing two-thirds of the brake fluid from the master cylinder reservoir.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should you do before installing the new caliper bracket for the 2001 GMC Jimmy? Posted by Customer
    A:
    Inspect both the caliper and the caliper bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Caliper, Rear Passenger Side 18026150 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 18026150 Caliper, Rear Passenger Side is available in the market under the name GM Brake Caliper Repair Kit, Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 18026150 Caliper, Rear Passenger Side fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 18026150 maintains top performance when functioning as the Caliper Kit, Rear Brake; Brake Caliper unit at its Rear Passenger Side. The component 18026150 is constructed from durable material and its dimensions span 7.9 x 9.3 x 6.6 inches while weighing 3.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Caliper Kit, Wheel Brake Cylinder/Caliper. The part 18026150 has available replacement options 18025477. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.