Make sure this part fits

GM 12565171
Exhaust Camshaft

2004-2010 GM

Customer Questions & Expert Answers (14)
GM 12565171 Exhaust Camshaft
  • Part Description
    Camshaft, Engine
  • Manufacturer
    General Motors
Make sure this part fits
$105.88 MSRP: $175.24
You Save: $69.36 (40%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase8 Cyl 4.6 L GAS
    2005-2010 Cadillac STSBase, Platinum8 Cyl 4.6 L GAS
    2004-2009 Cadillac XLRBase, Platinum8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12565171 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12565171 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be ensured about the camshaft flats for the 2008 Cadillac STS? Posted by Customer
    A:
    Ensure the camshaft flats are parallel with the camshaft cover rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the next step after removing the camshaft components for the 2004 Cadillac SRX? Posted by Customer
    A:
    Remove the crankshaft balancer and rotate the crankshaft using the Crankshaft Rotation Socket (EN 46111) until the camshafts are in a neutral (low tension) position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the camshaft flats be positioned for the 2006 Cadillac SRX? Posted by Customer
    A:
    The camshaft flats should be parallel with the camshaft cover rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to replace the camshaft on the right side (LP1, LY7) (3.6L) for the 2009 Cadillac SRX? Posted by Customer
    A:
    Begin by removing the upper intake manifold along with the lower intake manifold, followed by the camshaft cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step in the installation process for the 2005 Cadillac SRX? Posted by Customer
    A:
    Align the marks on the camshaft position actuators and timing chain.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the next step after creating slack in the chain for the 2008 Cadillac SRX? Posted by Customer
    A:
    Remove the camshaft position actuator bolt, then take out the camshaft bearing caps and the camshaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the final step in the camshaft replacement process for the 2004 Cadillac XLR? Posted by Customer
    A:
    Align the camshafts, install the EN 46328 over the camshafts, and reinstall the left exhaust and intake camshaft actuators.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the camshaft intermediate drive shaft be positioned for installation for the 2006 Cadillac STS? Posted by Customer
    A:
    Position the camshaft intermediate drive shaft to the engine, ensuring the bolt holes are aligned.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be installed after removing the timing chain retention tool for the 2007 Cadillac STS? Posted by Customer
    A:
    Install the crankshaft balancer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the camshaft bearing cap bolts be installed for the 2004 Cadillac XLR? Posted by Customer
    A:
    Install the camshaft bearing cap bolts in sequence, alternately hand tightening them until fully seated, then tighten to 5 Nm (44 inch lbs.) and an additional 30 degrees using the J 45059.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the actuators for the right bank be installed for the 2006 Cadillac STS? Posted by Customer
    A:
    Align the timing mark on the intake actuator marked RI with the timing chain black link, install the actuator, and secure it with the oil control valve tightened to 120 Nm (89 ft. lbs.). Repeat for the actuator marked RE.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you secure the EN-48313 in place for the 2009 Cadillac STS? Posted by Customer
    A:
    Partially expand the legs of the EN-48313 by turning the T-shaped handle clockwise until the feet contact the timing chain, ensuring one foot is engaged in a link pocket to prevent slippage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after removing the camshaft intermediate drive shaft for the 2005 Cadillac STS? Posted by Customer
    A:
    Clean and inspect the camshaft intermediate drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Exhaust Camshaft 12565171 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12565171 Exhaust Camshaft is available in the market under the name GM Camshaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12565171 Exhaust Camshaft fits certain Cadillac XLR, SRX, STS models.
The original GM component designated by manufacturer part number 12565171 maintains top performance when functioning as the Camshaft, Engine unit. The component 12565171 is constructed from durable material and its dimensions span 28.1 x 3.4 x 3.4 inches while weighing 5.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Camshaft. The part 12565171 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.