Make sure this part fits

GM 12563833
Intake Camshaft

2004-2010 GM

Customer Questions & Expert Answers (14)
GM 12563833 Intake Camshaft
  • Part Description
    Camshaft, Engine
  • Manufacturer
    General Motors
Make sure this part fits
$203.39 MSRP: $356.83
You Save: $153.44 (43%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase8 Cyl 4.6 L GAS
    2005-2010 Cadillac STSBase, Platinum8 Cyl 4.6 L GAS
    2004-2009 Cadillac XLRBase, Platinum8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12563833 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12563833 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tool is used to prevent engine rotation while loosening the camshaft position actuator bolt for the 2005 Cadillac SRX? Posted by Customer
    A:
    Use an open-end wrench at the camshaft hex.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be marked before removing the camshaft position actuator bolt and camshafts for the 2004 Cadillac SRX? Posted by Customer
    A:
    The timing chain and camshaft position actuators for proper assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to replace the camshaft intermediate drive shaft for the 2006 Cadillac STS? Posted by Customer
    A:
    First, remove the camshaft intermediate drive shaft sprocket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to replace the camshaft on the right side (LP1, LY7) for the 2008 Cadillac SRX? Posted by Customer
    A:
    Begin by removing the upper intake manifold and the lower intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What components should be reinstalled last for the 2009 Cadillac SRX? Posted by Customer
    A:
    Reinstall the intake camshaft position actuator solenoid and the camshaft sensors, followed by the camshaft cover, and finally, the upper intake manifold with the lower intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after installing the camshafts and camshaft bearing caps for the 2006 Cadillac SRX? Posted by Customer
    A:
    Remove the EN 46108 and install and tighten the camshaft position actuators, using an open-end wrench at the camshaft hex to prevent rotation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you position the camshafts before proceeding for the 2009 Cadillac STS? Posted by Customer
    A:
    Rotate the crankshaft balancer in a clockwise direction only until the camshafts are in a neutral position, ensuring the camshaft flats are parallel with the camshaft cover rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the crankshaft balancer be rotated for the 2008 Cadillac STS? Posted by Customer
    A:
    Rotate the crankshaft balancer in a clockwise direction only, using the crankshaft balancer bolt to position the camshafts in a neutral position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    When should the camshaft intermediate drive shaft be removed for the 2005 Cadillac STS? Posted by Customer
    A:
    The camshaft intermediate drive shaft should only be removed if wear is evident.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What components need to be removed to access the timing chains for the 2006 Cadillac STS? Posted by Customer
    A:
    The left camshaft actuator housing, right camshaft actuator housing, engine front cover, engine oil pump, right secondary camshaft drive chain, and left secondary camshaft drive chain.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the final step in the installation process for the 2007 Cadillac STS? Posted by Customer
    A:
    Install and tighten the camshaft position actuators, followed by the intake camshaft position actuator solenoid, camshaft sensors, camshaft cover, and the upper intake manifold with the lower intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the camshaft bearing cap bolts be loosened for the 2004 Cadillac XLR? Posted by Customer
    A:
    Alternately loosen the camshaft bearing cap bolts a few turns at a time until all valve spring pressure is released.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the camshaft followers be positioned for the 2004 Cadillac XLR? Posted by Customer
    A:
    Position them on the valve tip and the Stationary Hydraulic Lash Adjusters (SHLA), with the rounded head on the SHLA and the flat end on the valve tip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Intake Camshaft 12563833 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12563833 Intake Camshaft is available in the market under the name GM Camshaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12563833 Intake Camshaft fits certain Cadillac XLR, SRX, STS models.
The original GM component designated by manufacturer part number 12563833 maintains top performance when functioning as the Camshaft, Engine unit. The component 12563833 is constructed from durable material and its dimensions span 22.8 x 3.4 x 3.6 inches while weighing 5.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Camshaft. The part 12563833 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.