Make sure this part fits

GM 12565168
Intake Camshaft

2004-2010 GM

Customer Questions & Expert Answers (14)
GM 12565168 Intake Camshaft
  • Part Description
    Camshaft, Engine
  • Manufacturer
    General Motors
Make sure this part fits
$214.82 MSRP: $338.00
You Save: $123.18 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase8 Cyl 4.6 L GAS
    2005-2010 Cadillac STSBase, Platinum8 Cyl 4.6 L GAS
    2004-2009 Cadillac XLRBase, Platinum8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12565168 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12565168 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you prevent camshaft rotation during the installation of the camshaft position actuators for the 2005 Cadillac SRX? Posted by Customer
    A:
    Use the open-end wrench again to prevent camshaft rotation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the next step after marking for the 2006 Cadillac SRX? Posted by Customer
    A:
    Remove the camshaft position actuator bolt and the camshafts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be marked before removing the camshaft for the 2009 Cadillac STS? Posted by Customer
    A:
    Mark the timing chain and camshaft position actuators for proper assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you prevent the camshaft from rotating while loosening the actuator bolt for the 2008 Cadillac SRX? Posted by Customer
    A:
    Use an open-end wrench at the camshaft hex to prevent rotation and loosen the camshaft position actuator bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the final step in the camshaft replacement process for the 2004 Cadillac XLR? Posted by Customer
    A:
    Align the camshafts, install the EN 46328 over the camshafts, and finally, reinstall the right exhaust and intake camshaft actuators.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should not be tightened during installation for the 2007 Cadillac STS? Posted by Customer
    A:
    Do not tighten the camshaft position actuator bolt at this time.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to replace the left bank camshaft for the 2004 Cadillac SRX? Posted by Customer
    A:
    Remove the upper intake manifold with the lower intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the process for the right bank 1 secondary timing chain for the 2006 Cadillac STS? Posted by Customer
    A:
    Align its three black links with the corresponding actuator timing marks and the intermediate sprocket, then assemble the secondary timing chain to the intermediate sprocket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done to the camshaft carriers before installation for the 2004 Cadillac XLR? Posted by Customer
    A:
    Clean them with a lint-free cloth and apply lubricant GM P/N 12345001 or equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What tool is used to prevent rotation while loosening the camshaft position actuator bolt for the 2009 Cadillac SRX? Posted by Customer
    A:
    Use an open-end wrench at the camshaft hex to prevent rotation and loosen the camshaft position actuator bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you install the camshaft intermediate drive shaft for the 2005 Cadillac STS? Posted by Customer
    A:
    Position the camshaft intermediate drive shaft to the engine, ensuring the bolt holes are aligned.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the final step after installing the camshaft intermediate drive shaft for the 2006 Cadillac STS? Posted by Customer
    A:
    Finally, install the camshaft intermediate drive shaft sprocket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to replace the camshaft on the right side (LP1, LY7) for the 2008 Cadillac STS? Posted by Customer
    A:
    Begin by removing the upper intake manifold along with the lower intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Intake Camshaft 12565168 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12565168 Intake Camshaft is available in the market under the name GM Camshaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12565168 Intake Camshaft fits certain Cadillac XLR, SRX, STS models.
The original GM component designated by manufacturer part number 12565168 maintains top performance when functioning as the Camshaft, Engine unit. The component 12565168 is constructed from durable material and its dimensions span 23.7 x 3.4 x 3.6 inches while weighing 5.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Camshaft. The part 12565168 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.