Make sure this part fits

GM 15733230
Converter & Pipe

1996-2000 GM

Customer Questions & Expert Answers (6)
GM 15733230 Converter & Pipe
  • Part Description
    Converter Assembly-Catalytic (W/Exhaust Manifold Pipe T; Catalytic Converter; Exhaust Pipe
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2000 Chevrolet C2500Base, Cheyenne, LS, Silverado, WT8 Cyl 7.4 L GAS
    1997-1999 Chevrolet C2500 SuburbanBase, LS, LT8 Cyl 7.4 L GAS
    1996-2000 Chevrolet C3500Base, Cheyenne, LS, Silverado8 Cyl 7.4 L GAS
    1996-2000 Chevrolet K2500Base, Cheyenne, LS, Silverado, WT8 Cyl 7.4 L GAS
    1997-1999 Chevrolet K2500 SuburbanBase, LS, LT8 Cyl 7.4 L GAS
    1996-2000 Chevrolet K3500Base, Cheyenne, LS, Silverado8 Cyl 7.4 L GAS
    1996-2000 GMC C2500Sierra SL, Sierra SLE, Sierra SLT8 Cyl 7.4 L GAS
    1997-1999 GMC C2500 SuburbanBase, SLE, SLT8 Cyl 7.4 L GAS
    1996-2000 GMC C3500Sierra SL, Sierra SLE, Sierra SLT8 Cyl 7.4 L GAS
    1996-2000 GMC K2500Sierra SL, Sierra SLE, Sierra SLT8 Cyl 7.4 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15733230 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15733230 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service the catalytic converter on those weighing 8600 lbs and above on GMC C3500? Posted by Customer
    A:
    To access the Catalytic Converter on cars of 8600 lbs or more, you must raise and secure the car first. After unplugging the Oxygen Sensor wires, remove the nuts screwed into the y-pipe flat flange, then remove the nuts, studs and flange seals from the y-pipe and Exhaust Manifold. After that, take out the y-pipe and Catalytic Converter assembly as well as the Muffler. First, set the flange seals onto the y-pipe and Catalytic Converter on the Exhaust Manifold, then put the studs in and tighten them to 22 n.m (16 lb ft). Put on the exhaust nuts where the studs meet the Exhaust Manifold and tighten them to 64 n.m (47 lb ft). Relocate the Muffler and Catalytic Converter assembly, put the y-pipe and Catalytic Converter into the proper place on the flat flange and put the nuts on the flat flange studs, securing them to 64 n.m (47 lb ft) of torque. Once finished, secure the Oxygen Sensor connections, look for proper space and alignment and bring the car down.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the exhaust manifold pipe for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Raise and suitably support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    How should the new nuts be installed for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Install the new nuts connecting the Y-pipe and catalytic converter assembly to the exhaust manifold, tightening them to 64 N.m (47 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Catalytic Converter
    Q:
    What should be reconnected after tightening the nuts for the 2000 GMC C2500? Posted by Customer
    A:
    Reconnect the electrical connector to the oxygen sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Catalytic Converter
    Q:
    What is the first step to replace the exhaust manifold pipe for the 2000 GMC C3500? Posted by Customer
    A:
    Raise and suitably support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Converter & Pipe 15733230 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15733230 Converter & Pipe is available in the market under the name GM Catalytic Converter, Exhaust Pipe. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15733230 Converter & Pipe fits certain Chevrolet C2500, C3500, K2500 models, as well as GMC C2500, C3500, K2500 models.
The original GM component designated by manufacturer part number 15733230 maintains top performance when functioning as the Converter Assembly-Catalytic (W/Exhaust Manifold Pipe T; Catalytic Converter; Exhaust Pipe unit. The component 15733230 is constructed from durable material and its dimensions span 52.5 x 30.2 x 14.7 inches while weighing 32.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Converter; Converter, Catalytic Converter; Converter, Exhaust Pipe. The part 15733230 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.