Make sure this part fits

GM 25724154
Exhaust Pipe

1999-2005 GM

Customer Questions & Expert Answers (12)
GM 25724154 Exhaust Pipe
  • Part Description
    Pipe, Exhaust Pipe
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25724154
    Part DescriptionPipe, Exhaust Pipe
    Other NamesCrossover Pipe; Front Pipe; Connector Pipe
    Item Dimensions19.1 x 3.1 x 9.5 inches
    Item Weight8.20 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU25724154
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Cadillac DeVilleBase, DHS, DTS, Protection Series8 Cyl 4.6 L GAS
    1999-2004 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
    2001-2003 Oldsmobile AuroraBase8 Cyl 4.0 L GAS
    2004-2005 Pontiac BonnevilleGXP8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25724154 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25724154 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done with the oxygen sensor for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Remove the oxygen sensor without disconnecting the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Catalytic Converter
    Q:
    How should the catalytic converter be secured for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Position the catalytic converter to the exhaust manifold rear pipe and secure it with the 4 nuts, tightening them to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    What is the final step after securing the heat shield for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Finally, reinstall the exhaust system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Catalytic Converter
    Q:
    What is the torque specification for the cylinder head and crankcase support bolts for the 2000 Cadillac DeVille? Posted by Customer
    A:
    Tighten the cylinder head support bolt and the crankcase support bolt to 25 Nm (18 ft. lbs.) each.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    What should be removed after the crankcase bolt for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Remove the nut securing the coil cassette ground wire to the cylinder head and the bolt securing the front exhaust manifold pipe to the cylinder head.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    What is the first step to ensure safety when replacing the front exhaust manifold pipe for the 2001 Cadillac DeVille? Posted by Customer
    A:
    Observe precautions related to hot exhaust systems and exhaust parts removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    What is the first step to ensure safety when replacing the front exhaust manifold pipe for the 2001 Cadillac Seville? Posted by Customer
    A:
    Observe precautions related to hot exhaust systems and exhaust parts removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    What is the final step after completing the installation for the 2000 Cadillac Seville? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    How should the support bolts be tightened during installation for the 2000 Cadillac Seville? Posted by Customer
    A:
    Hand tighten the support bolts (1,3), then install the exhaust front pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    How should the front exhaust manifold pipe be secured to the engine for the 2002 Cadillac Seville? Posted by Customer
    A:
    Install the bolts (1, 3) securing the front exhaust manifold pipe to the engine, tightening the support bolts to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    What is the final step after securing the catalytic converter for the 2004 Cadillac Seville? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25724154, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25724154 Exhaust Pipe. It is sometimes referred to as GM Catalytic Converter, GM Exhaust Pipe. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25724154 Exhaust Pipe. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery