Make sure this part fits

GM 10241007
Front Panel, Inner Driver Side

1997-2009 GM

Customer Questions & Expert Answers (8)
GM 10241007 Front Panel, Inner Driver Side
  • Part Description
    Extension, Front Fender Inner Wheel House
  • Position
    Front Inner Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10241007
    Part DescriptionExtension, Front Fender Inner Wheel House
    Item Dimensions6.6 x 6.7 x 15.1 inches
    Item Weight1.60 Pounds
    PositionFront Inner Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU10241007
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2005-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    1997-2004 Buick Regal25th Anniversary Edition, GS, GSE, LS, LSE6 Cyl 3.8 L GAS
    2000-2005 Chevrolet ImpalaBase, LS, LS Sport, SS6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    2000-2005 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    1998-2002 Oldsmobile IntrigueBase, GL, GLS, GX6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
    1997-2008 Pontiac Grand PrixBase, GT, GT1, GT2, GTP, GXP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 10241007 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10241007 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the front fender liner for the 2001 Buick Century? Posted by Customer
    A:
    Remove the bolts from the front fender liner at the front bumper fascia, the nut from the stud at the rear of the front fender liner, the bolt from the front tab of the front fender liner at the lower engine compartment side rail, and the bolts from the rear of the fender.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fender Splash Shield
    Q:
    What is the last step in the installation process for the 2005 Buick Century? Posted by Customer
    A:
    Install the bolt from the front tab of the front fender liner at the lower engine compartment side rail, tightening it to 4.5 Nm (40 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fender Splash Shield
    Q:
    How do you secure the rear of the front fender liner during installation for the 2000 Buick Regal? Posted by Customer
    A:
    Install the nut to the stud at the rear of the front fender liner, tightening it to 4 Nm (35 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fender Splash Shield
    Q:
    What is the first step to replace the front fender liner for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Drill out the plastic rivets from the front fascia extension corner to the front fender liner, if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fender Splash Shield
    Q:
    What is the final step in the process for the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    Reinstall the rear tires and wheels and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fender Splash Shield
    Q:
    What should be removed after raising for the 2003 Chevrolet Impala? Posted by Customer
    A:
    The rear tires and wheels.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fender Splash Shield
    Q:
    What is the first step to replace the front fender liner for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Drill out the plastic rivets from the front fascia extension corner to the front fender liner, if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fender Splash Shield
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 10241007, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 10241007 Front Panel, Inner Driver Side. It is sometimes referred to as GM Fender Splash Shield. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 10241007 Front Panel, Inner Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery