Make sure this part fits

GM 15756008
Axle Assembly, Front Center

1997-2005 GM

Customer Questions & Expert Answers (11)
GM 15756008 Axle Assembly, Front Center
  • Part Description
    Axle, Front Axle And Axle Center; Differential; Axle Shaft
  • Position
    Front Center
  • Replaces
    26046029
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1997-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1997-2001 GMC JimmyDiamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1997-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1997-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15756008 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15756008 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you disconnect the wheel drive shafts from the differential carrier for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Strike a block of wood or brass drift against the tripot housing to overcome the snap ring pressure.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the final step in the installation process for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Install the front brake rotors and the front differential carrier shield, then remove the strap from the frame, install the two front tire and wheel assemblies, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the final step regarding the pinion shaft locking bolt for the 2002 Chevrolet S10? Posted by Customer
    A:
    Install the new pinion shaft locking bolt and tighten it to 36 Nm (27 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step to replace the Front Drive Axle (S4WD) inner shaft or housing for the 2003 Chevrolet S10? Posted by Customer
    A:
    Begin by raising the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after removing the axle shaft from the housing for the 2003 Chevrolet S10? Posted by Customer
    A:
    Carefully insert the new axle shaft into the rear axle housing, sliding it into the differential assembly to engage the splines with the differential side gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the procedure for installing the knuckle onto the drive axle for the 2002 Chevrolet S10? Posted by Customer
    A:
    Slightly start the knuckle onto the drive axle while guiding the lower ball stud to its proper location on the steering knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be removed after raising for the 2000 GMC Jimmy? Posted by Customer
    A:
    The rear wheels and brake drums, followed by the rear brake rotors if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the inner axle shaft and housing assembly for the 2001 GMC Jimmy? Posted by Customer
    A:
    Carefully work the inner axle shaft and housing assembly out of the drive axle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after removing the axle shaft from the housing for the 2001 GMC Jimmy? Posted by Customer
    A:
    Carefully insert the new axle shaft into the rear axle housing, ensuring the splines engage the differential side gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after inserting the drift for the 2004 GMC Sonoma? Posted by Customer
    A:
    Remove the axle nut and washer, then take out the drift from the brake rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Axle Assembly, Front Center 15756008 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15756008 Axle Assembly, Front Center is available in the market under the name GM Axle Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15756008 Axle Assembly, Front Center fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15756008 maintains top performance when functioning as the Axle, Front Axle And Axle Center; Differential; Axle Shaft unit at its Front Center. The component 15756008 is constructed from durable material and its dimensions span 26.8 x 18.5 x 13.1 inches while weighing 68.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Differential Assembly. The part 15756008 has available replacement options 26046029. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.