Make sure this part fits

GM 15066132
Lock Assembly, Front Driver Side

1998-2003 GM

Customer Questions & Expert Answers (7)
GM 15066132 Lock Assembly, Front Driver Side
GM 15066132 Lock Assembly, Front Driver Side
  • Part Description
    Lock Assembly-Front Side Door *Marked Print; Door Lock
  • Position
    Front Driver Side
  • Replaces
    16631171
  • Manufacturer
    General Motors
Make sure this part fits
$174.49 MSRP: $260.87
You Save: $86.38 (34%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15066132
    Part DescriptionLock Assembly-Front Side Door *Marked Print; Door Lock
    Other NamesLock, Door Lock
    Item Dimensions11.7 x 5.2 x 4.9 inches
    Item Weight2.30 Pounds
    PositionFront Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces16631171
    ManufacturerGeneral Motors
    SKU15066132
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2003 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1998-2003 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15066132 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15066132 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front door lock actuator on Chevrolet S10? Posted by Customer
    A:
    The process of replacing the front Door Lock Actuator requires beginning with door trim panel removal then proceeding to water deflector and Door Latch Assembly removal. The lock actuator requires removal of its 2 securing screws. After lifting and rotating the actuator gently you must disconnect the rubber Bumper from the latch before removing the actuator. Begin the installation by binding the rubber Bumper on the latch yet ensure the first gear tooth alignment between the actuator and latch components. Full engagement of the rubber Bumper becomes possible when you rotate the actuator toward the latch before positioning it at the top of the latch. Set the actuator in place by using the 2 screws to fasten it onto the latch while tightening them to 0.75 n.m (6 lb in). The last step involves reinstalling the latch onto the door and then putting back both the water deflector and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the latch assembly for the 2002 Chevrolet S10? Posted by Customer
    A:
    Remove the lock actuator from the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the final step after securing the actuator for the 2002 Chevrolet S10? Posted by Customer
    A:
    Reinstall the latch to the door, followed by the water deflector and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after removing the screws for the 2003 Chevrolet S10? Posted by Customer
    A:
    Lift and rotate the actuator away from the latch to disengage the rubber bumper from the latch, then remove the actuator from the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after detaching the rods for the 2003 GMC Sonoma? Posted by Customer
    A:
    Remove the fasteners securing the latch assembly to the door and take out the latch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How should the actuator be aligned during installation for the 2003 GMC Sonoma? Posted by Customer
    A:
    Ensure that the first tooth of the gear on the actuator aligns and interlocks properly with the first tooth of the gear on the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15066132, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15066132 Lock Assembly, Front Driver Side. It is sometimes referred to as GM Door Lock, GM Door Lock Actuator, GM Door Latch Assembly. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15066132 Lock Assembly, Front Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery