Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15058959
Coil Spring, Front

1984-2003 GM

Customer Questions & Expert Answers (4)
GM 15058959 Coil Spring, Front
  • Part Description
    Spring, Front Chassis; Coil Spring Set; Coil Springs
  • Position
    Front
  • Replaces
    15654772
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 15058959 Coil Spring, Front is Ref No. 15 in the diagram below

    1996 Chevy S10 Coil Spring, Front Diagram for 15058959
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15058959

  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2002 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme6 Cyl 4.3 L GAS
    1995-2003 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1995-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1995-2003 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1996-2002 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    1984 Oldsmobile OmegaBase, Brougham4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15058959 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15058959 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front coil springs on Chevrolet S10? Posted by Customer
    A:
    To replace the front Coil Springs, first get the stabilizer shaft link out of the lower Control Arm, then the shock absorber to remove. Position the coil spring remover and installer (J 23028-01) to the end of a suitable jack and use the same tool to cradle the lower Control Arm bushings. Lift the jack to relieve the tension on the lower Control Arm pivot bolts and twist the steering wheel to one side in order to get the steering linkage to clear the front lower Control Arm pivot bolt. Then remove the pivot bolts and nuts from the lower Control Arm, the rear pivot bolt from the lower Control Arm as well as the front pivot bolt of the lower Control Arm. Gradually lower the coil spring remover and installer (J 23028-01) to release front coil spring tension, and remove the front coil spring and the insulators while only applying force to the lower Control Arm or lower ball joint. For installation, set the front coil spring along with the insulators in the lower Control Arm with the final situation that the front coil spring covers only part of an inspection drain hole and leaves the other half or all of it open, rotating the coil spring to provide the appropriate cover. Support the Control Arm with coil spring remover and installer (J 23028-01) and align the coil spring and insulator in the upper seat of the spring from the frame. Raise the same lower Control Arm with the same tool and bolt the lower Control Arm from the frame ensuring it has adequate steering linkage clearance fixing the bolts in the specified direction. Install lower Control Arm front pivot bolt and new nut, then the lower Control Arm rear pivot bolt and a new nut. Tighten up the lower Control Arm pivot bolts nuts while the front suspension is still loaded (the lower Control Arm front bolt should be tightened 115 Nm (85 ft. Lbs.) and the lower Control Arm rear bolt should be tightened up to 98 nm (72 ft. Lbs.)). Lastly, retract the coil spring remover and installer (J 23028-01), install the shock absorber and adjust the stabilizer shaft link to the lower Control Arm and inspect the front wheel alignment.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you relieve tension from the front coil spring for the 2000 GMC Jimmy? Posted by Customer
    A:
    Slowly lower the Coil Spring Remover and Installer (J 23028-01).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be done after tightening the bolts for the 2001 GMC Jimmy? Posted by Customer
    A:
    Remove the J 23028-01, install the shock absorber, and then the stabilizer shaft link to the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Coil Spring, Front 15058959 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15058959 Coil Spring, Front is available in the market under the name GM Coil Springs. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15058959 Coil Spring, Front fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada, Omega models.
The original GM component designated by manufacturer part number 15058959 maintains top performance when functioning as the Spring, Front Chassis; Coil Spring Set; Coil Springs unit at its Front. The component 15058959 is constructed from durable material and its dimensions span 5.9 x 5.4 x 13.5 inches while weighing 12.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Spring; Spring, Front(Coil Type). The part 15058959 has available replacement options 15654772. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.