Make sure this part fits

GM 20859642
Axle Assembly, Front Driver Side

2000-2011 GM

Customer Questions & Expert Answers (8)
GM 20859642 Axle Assembly, Front Driver Side
GM 20859642 Axle Assembly, Front Driver Side
  • Part Description
    Shaft Assembly-Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle
  • Position
    Front Driver Side
  • Replaces
    26073399, 88965659, 88965657, 26073386
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2005-2009 Buick LaCrosseCX, CXL, CXS6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
    2000-2004 Buick RegalGS, GSE, LS, LSE6 Cyl 3.8 L GAS
    2000-2011 Chevrolet Impala50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2000-2007 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS
    2000-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2000-2002 Oldsmobile IntrigueGL, GLS, GX6 Cyl 3.5 L GAS
    2000-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2000-2008 Pontiac Grand PrixBase, GT, GT1, GT2, GTP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    2000-2005 Pontiac MontanaBase6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 20859642 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 20859642 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be detached after removing the wheel and tire for the 2000 Buick Century? Posted by Customer
    A:
    Detach the stabilizer shaft link and the front wheel drive shaft nut, using a drift or flat-bladed tool to prevent the rotor from turning.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done if it is necessary to remove the front wheel drive axle from the transaxle for the 2004 Buick Regal? Posted by Customer
    A:
    Utilize the Axle Shaft Remover (J 33008-A), Axle Shaft Remover Extension (J 29794), and Slide Hammer (J 2619-01) to separate the axle from the transaxle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done to protect the threads while using the J 28733-B for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Ensure the nut can be partially reinstalled.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you install the front wheel drive axle into the transaxle for the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    Insert the front wheel drive axle into the transaxle, ensuring the retaining ring is properly seated by grasping the inner housing and pulling outward without pulling on the axle shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after removing the left drive axle for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Install the new left drive axle, ensuring it snaps into place and the retaining ring is engaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What components need to be disconnected after removing the spindle nut for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Remove the stabilizer shaft link, disconnect the outer tie rod end from the steering knuckle, and disconnect the electrical connector from the wheel speed sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the procedure for installing the new wheel drive shaft for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Carefully align it with the differential output shaft, ensuring not to damage the oil seal, and fully seat it onto the differential output shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Axle Assembly, Front Driver Side 20859642 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 20859642 Axle Assembly, Front Driver Side is available in the market under the name GM Axle Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 20859642 Axle Assembly, Front Driver Side fits certain Chevrolet Impala, Monte Carlo, Venture models, as well as Buick Regal, LaCrosse, Century. Additionally, it is compatible with Pontiac Grand Prix, Montana and Oldsmobile Intrigue, Silhouette models.
The original GM component designated by manufacturer part number 20859642 maintains top performance when functioning as the Shaft Assembly-Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle unit at its Front Driver Side. The component 20859642 is constructed from durable material and its dimensions span 28.9 x 5.9 x 6.0 inches while weighing 15.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Axle; Shaft, Front Wheel Drive Axle. The part 20859642 has available replacement options 26073399, 88965659, 88965657, 26073386. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.