Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 25314263
Fuel Gauge Sending Unit

1997-2002 GM

Customer Questions & Expert Answers (7)
GM 25314263 Fuel Gauge Sending Unit
  • Part Description
    Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 25314263 Fuel Gauge Sending Unit is Ref No. 9 in the diagram below

    1997 Chevy Express 2500 Fuel Gauge Sending Unit Diagram for 25314263
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 25314263

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997 Chevrolet Express 1500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    2001-2002, 1997 Chevrolet Express 2500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    2001-2002, 1997 Chevrolet Express 3500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
    1997 Chevrolet P30Base6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
    1997 GMC Savana 1500Base, SLE6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    2001-2002, 1997 GMC Savana 2500Base, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    2001-2002, 1997 GMC Savana 3500Base, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25314263 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25314263 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front fuel level sensor on GMC Savana 2500? Posted by Customer
    A:
    The replacement process for the fuel level sensor buffer module begins with taking out the instrument panel passenger knee bolster first. First disconnect the electrical connector from the module and then extract the fuel level sensor buffer module from its installation position in the instrument panel passenger knee bolster inner bracket. Place the new fuel level sensor buffer module into its position followed by connecting the electrical connector to it before putting back the module onto the instrument panel passenger knee bolster inner bracket. Install the instrument panel passenger knee bolster as the final step.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the Fuel Level Sensor on GMC Savana 3500? Posted by Customer
    A:
    The service process for the Fuel Level Sensor begins with disconnecting the negative Battery Cable. First empty the fuel system pressure while draining the Fuel Tank contents. Begin by removing both the Fuel Tank together with the fuel sender assembly. Disconnect the fuel pump electrical connector first before removing the Fuel Level Sensor electrical connector retaining clip which allows disconnecting the Fuel Level Sensor electrical connector from underneath the fuel sender cover. Disengage the Fuel Level Sensor retaining clip before you squeeze its locking tangs and ease out the sensor. The first step for installation involves installing the Fuel Level Sensor and fastening it with its retaining clip. Connect the electrical connector to the Fuel Level Sensor before establishing its retaining clip. Complete the resistance testing of the fuel pump electrical connector before installing the fuel sender assembly followed by the Fuel Tank. After refilling the Fuel Tank you should install the fuel filler cap before reconnecting the negative Battery Cable. Complete the inspection by activating the ignition for two seconds then waiting for ten seconds before activating it again to verify that no fuel leaks occur.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after securing the new fuel level sensor for the 2001 Chevrolet Express 3500? Posted by Customer
    A:
    Connect the electrical connector to the fuel level sensor and attach the retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What should be done after draining the fuel tank for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the fuel tank and the fuel sender assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What should you do if the fuel pump strainer contains contaminants for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Replace the strainer and ensure to clean the fuel tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    How do you remove the fuel pump strainer for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Rotate the strainer in one direction and pull it off the pump, discarding it after inspection.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Fuel Gauge Sending Unit 25314263 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25314263 Fuel Gauge Sending Unit is available in the market under the name GM Fuel Tank Sending Unit, Fuel Level Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25314263 Fuel Gauge Sending Unit fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 25314263 maintains top performance when functioning as the Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit unit. The component 25314263 is constructed from durable material and its dimensions span 8.2 x 6.1 x 6.2 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Level Sensor. The part 25314263 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.