Make sure this part fits

GM 19300888
Handle, Outside

2002-2006 GM

Customer Questions & Expert Answers (6)
GM 19300888 Handle, Outside
GM 19300888 Handle, Outside
  • Part Description
    Handle, End Gate Lock; Tailgate Handle
  • Replaces
    15196402, 15136045, 15046564, 15196401, 15196403, 15074074
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19300888
    Part DescriptionHandle, End Gate Lock; Tailgate Handle
    Item Dimensions8.4 x 6.2 x 10.5 inches
    Item Weight1.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15196402, 15136045, 15046564, 15196401, 15196403, 15074074
    ManufacturerGeneral Motors
    SKU19300888
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 19300888 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19300888 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace a Tailgate Handle on an End Gate on Cadillac Escalade? Posted by Customer
    A:
    Begin your tailgate release handle replacement by opening the liftgate then taking off the trim panel. The handle assembly replacement starts with removing the nuts from behind the tailgate's handle assembly while simultaneously freeing the actuator cable assembly from the handle. Install the handle assembly into the tailgate following Fastener Notice in Service Precautions before securing nuts behind the handle assembly from the tailgate end and torque the bolts to 9 N.m (80 lb in). Snap the actuator cable assembly to the handle before securing the liftgate trim panel.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the tailgate handle on Cadillac Escalade? Posted by Customer
    A:
    The tailgate release handle on the avalanche requires initial bezel and linkage rod retainer removal from the Tailgate Handle before handle replacement. Begin with bolt removal from the handle's tailgate attachment and continue by disassembling the tailgate spoiler and extracting the handle. First install the new handle within the tailgate before tightening 3 bolts to 25 n.m (18 lb ft) torque. Reinstall the tailgate spoiler followed by handling the linkage rod reattachment before adjusting the Tailgate Latch. The Tailgate Handle bezel needs to be reinstalled during this step.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the Tailgate Handle on Cadillac Escalade ESV? Posted by Customer
    A:
    Service technicians must remove adhesive blocks from the tailgate handle after freeing the upper retaining tabs. When installing the latch handle bezel make sure to use an end gate that is fully closed while also cleaning the sheet metal at both sides of the opening using an alcohol wipe. Fit the bezel at the opening's bottom section inside the end gate while removing protective tape from both sides of the foam block. Push the bezel ahead to lock the upper integral tabs while a firm palm squeeze activates the foam adhesive along both outside edges. The upper integral locking tabs require a slight downward pressure using a small flat-bladed tool at specific points until they release. After setting the blocks in position check that the end gate panel adheres to both foam blocks correctly.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you access the outboard nut for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Access the outboard nut by removing the rubber cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What additional components may need to be disconnected for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    If required, disconnect the electrical connector and remove the actuator cable along with the door lock cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19300888, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19300888 Handle, Outside. It is sometimes referred to as GM Door Handle, GM Tailgate Handle. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19300888 Handle, Outside. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery