Make sure this part fits

GM 15185368
Grip Handle

1998-2005 GM

Customer Questions & Expert Answers (15)
GM 15185368 Grip Handle
  • Part Description
    Handle Assembly-Assist *Graphite
  • Replaces
    15011453
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1999-2004 Chevrolet S10Base, LS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1998-2001 GMC JimmyDiamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1999-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1998-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15185368 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15185368 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the lock rod be aligned during installation for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Align the lock rod to the door lock knob.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after drilling out the rivets for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Remove the endgate handle assembly from the endgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What needs to be done with the screws securing the outside door handle for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Remove the screws securing the outside door handle to the door panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What tool is used to drill out the rivets for the 2002 Chevrolet S10? Posted by Customer
    A:
    The Rivet Gun (J 34940) is used to drill out the rivets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step for installation of the new inside door handle for the 2003 Chevrolet S10? Posted by Customer
    A:
    Slide the new inside door handle forward into the door, ensuring it is properly seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you detach the inside door handle from the door for the 2002 Chevrolet S10? Posted by Customer
    A:
    Slide the handle rearward.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front inside door handle for the 2002 Chevrolet S10? Posted by Customer
    A:
    Remove the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the tailgate release handle for the 2003 Chevrolet S10? Posted by Customer
    A:
    Open the endgate and remove the screws that secure the inside handle to the endgate handle assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What needs to be removed to take out the handle for the 2000 GMC Jimmy? Posted by Customer
    A:
    Remove the screws securing the outside door handle to the door panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front door interior handle for the 2000 GMC Jimmy? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you access the door handle screw access hole for the 2001 GMC Jimmy? Posted by Customer
    A:
    Peel back the corner of the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after installing the rods and rod retainer locks for the 2003 GMC Sonoma? Posted by Customer
    A:
    Insert the handle locator tab into the locator cutout and move the handle rearward, ensuring the fastener hole is indexed to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear outside door handle for the 2003 GMC Sonoma? Posted by Customer
    A:
    Close the window and remove the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How should the upper lock rod be positioned during installation for the 2003 GMC Sonoma? Posted by Customer
    A:
    The upper lock rod should be positioned in the retainer with approximately 10 1-2 mm (0.39-0.47 in) showing, which is about 11-12 threads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Grip Handle 15185368 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15185368 Grip Handle is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15185368 Grip Handle fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15185368 maintains top performance when functioning as the Handle Assembly-Assist *Graphite unit. The component 15185368 is constructed from durable material and its dimensions span 8.9 x 1.9 x 1.3 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Assist Strap; Handle, Door Inside Assist Handle. The part 15185368 has available replacement options 15011453. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.