Make sure this part fits

GM 25965491
Handle, Inside, Driver Side

2002-2009 GM

Customer Questions & Expert Answers (17)
GM 25965491 Handle, Inside, Driver Side
  • Part Description
    Handle, Door Lock Inside Handle; Interior Door Handle
  • Position
    Driver Side
  • Replaces
    15044612, 15856677, 25868201
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25965491
    Part DescriptionHandle, Door Lock Inside Handle; Interior Door Handle
    Other NamesHandle, Door Lock Remote Control Inside
    Item Dimensions4.8 x 4.9 x 11.6 inches
    Item Weight2.10 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15044612, 15856677, 25868201
    ManufacturerGeneral Motors
    SKU25965491
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25965491 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25965491 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the lock rod for the 2006 Buick Rainier? Posted by Customer
    A:
    Take off the nuts that secure the outside door handle to the door and remove the handle itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front door interior handle for the 2006 Buick Rainier? Posted by Customer
    A:
    First, remove the door trim panel and the handle retaining bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you release the lock rod from the handle assembly for the 2007 Buick Rainier? Posted by Customer
    A:
    Release the upper lock rod retainer from the rod and remove the lock rod from the handle assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after securing the handle to the bracket for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Reattach the lock rod to the handle and secure it with the clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step for installation for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    First install the bezel to the door, ensuring that all 4 retaining tabs are fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done if the lock cylinder is equipped for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the lock cylinder from the handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should you do after removing the handle from the door for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    For installation, position the handle to the door and install the rods, followed by the rod retainer locks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after releasing the handle locator tab for the 2007 GMC Envoy? Posted by Customer
    A:
    Release the rod retainer locks and remove the rods from the handle before taking the handle out of the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after installing the handle assembly back onto the door for the 2003 GMC Envoy? Posted by Customer
    A:
    Reattach the upper lock rod to the handle assembly and install the lock rod retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you use the Door Handle Clip Remover for the 2004 GMC Envoy? Posted by Customer
    A:
    Insert it between the door handle and the door, then press the spring clip off the door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in the installation process for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the lock cylinder to the handle if applicable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front side door outside handle for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Close the window completely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after removing the lock rod for the 2008 GMC Envoy? Posted by Customer
    A:
    Take off the nut (Nut 115) that secures the handle and bracket to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be removed after closing the window for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the door trim panel and the rear half of the water deflector from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in removing the handle for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Take the handle out of the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the door trim panel for the 2009 GMC Envoy? Posted by Customer
    A:
    Take out the handle retaining bolt and slide the handle forward to release the handle locator tab from the locator cutout.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25965491, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25965491 Handle, Inside, Driver Side. It is sometimes referred to as GM Door Handle. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25965491 Handle, Inside, Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery