Make sure this part fits

GM 15202913
Handle, Outside, Black Grained, Driver Side

1998-2005 GM

Customer Questions & Expert Answers (15)
GM 15202913 Handle, Outside, Black Grained, Driver Side
GM 15202913 Handle, Outside, Black Grained, Driver Side
  • Part Description
    Handle, Door Outside Handle; Exterior Door Handle
  • Position
    Driver Side
  • Replaces
    15757230, 15007215
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    2001-2004 Chevrolet S10Base, LS, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1998-2001 GMC JimmyDiamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    2001-2004 GMC SonomaSL, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1998-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15202913 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15202913 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the front inside door handle bezel screw for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Remove the screw that retains the rear inside door handle bezel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear door inside handle for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Open the endgate and remove the screws that secure the inside handle to the endgate handle assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front outside door handle for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    First, close the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after drilling out the rivets for the 2002 Chevrolet S10? Posted by Customer
    A:
    Remove the endgate handle assembly from the endgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in the installation of the new inside door handle for the 2002 Chevrolet S10? Posted by Customer
    A:
    Slide the new inside door handle forward into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step for installation of the new inside door handle for the 2003 Chevrolet S10? Posted by Customer
    A:
    Slide the new inside door handle forward into the door, ensuring it is properly seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step for installation of the new inside door handle for the 2002 Chevrolet S10? Posted by Customer
    A:
    Slide the new inside door handle forward into place, ensuring it is properly seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the screws for the 2003 Chevrolet S10? Posted by Customer
    A:
    Drill out the rivets that hold the endgate handle assembly to the endgate and remove the assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in the installation of the new inside door handle for the 2000 GMC Jimmy? Posted by Customer
    A:
    Slide the new inside door handle forward into place, ensuring it is properly seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What needs to be detached from the outside door handle for the 2001 GMC Jimmy? Posted by Customer
    A:
    Detach the outside door handle rod from the handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you access the door handle screw access hole for the 2003 GMC Sonoma? Posted by Customer
    A:
    Peel back the corner of the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new latch control handle for the 2003 GMC Sonoma? Posted by Customer
    A:
    Position the new latch control handle onto the door and secure it with the bolts, tightening them to 8 N.m (71 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front door interior handle for the 2003 GMC Sonoma? Posted by Customer
    A:
    Remove the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be detached from the handle for the 2000 GMC Jimmy? Posted by Customer
    A:
    Detach the outside door lock rod and the outside door handle rod from the handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle, Outside, Black Grained, Driver Side 15202913 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15202913 Handle, Outside, Black Grained, Driver Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15202913 Handle, Outside, Black Grained, Driver Side fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15202913 maintains top performance when functioning as the Handle, Door Outside Handle; Exterior Door Handle unit at its Driver Side. The component 15202913 is constructed from durable material and its dimensions span 8.1 x 7.7 x 3.6 inches while weighing 1.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15202913 has available replacement options 15757230, 15007215. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.