Make sure this part fits

GM 25875521
Handle, Outside, Dark Smoke Gray, Front Driver Side

2004-2012 GM

Customer Questions & Expert Answers (17)
GM 25875521 Handle, Outside, Dark Smoke Gray, Front Driver Side
GM 25875521 Handle, Outside, Dark Smoke Gray, Front Driver Side
  • Part Description
    Handle-Front Side Door Outside *Dark Smoke Gry; Exterior Door Handle
  • Position
    Front Driver Side
  • Replaces
    15224884, 97319316, 15847169, 15243676, 25801996
  • Manufacturer
    General Motors
Make sure this part fits
$34.75 MSRP: $50.16
You Save: $15.41 (31%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25875521 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25875521 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front side inner door handle on Chevrolet Colorado? Posted by Customer
    A:
    The first step to replace the front side door inside handle requires removing the front door trim panel together with the water deflector. The first procedure involves sliding the inside door handle toward the rear to eliminate the retaining tabs from the door inner panel. Next remove the lock cables from the inside door handle before removing the handle completely from inside the door. Start installation by putting inside door lock cables on the door handle then inserting retaining tabs into the slots of the door inner panel followed by pulling the handle forward until fully engaged. Refeed the water deflector and front door trim panel during the last installation steps.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you reconnect the rear outside door handle rod for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Reconnect the rear outside door handle rod using the retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should you do after removing the handle for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Install the spring clip onto the new rear side access door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear side access door handle for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Open the front and rear side access doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear side access door inside handle for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Open the front and rear side access doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new outside door handle for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    First, attach the lock cylinder to the outside door handle, then install the outside door handle back onto the front door, ensuring to tighten the bolts to 9 Nm (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should you do to disconnect the lock cylinder rod for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Release the retaining clip to disconnect the lock cylinder rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the rear door trim panel for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Slide the inside door handle rearward to release the retaining tabs from the door inner panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front side door inside handle for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    First, remove the front door trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What components need to be reinstalled after the handle is secured for the 2009 GMC Canyon? Posted by Customer
    A:
    Reinstall the rear door water deflector, the rear inside door handle, the rear door speaker, and finally the rear door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you secure the inside door handle in place for the 2010 GMC Canyon? Posted by Customer
    A:
    Insert the retaining tabs into the slots of the door inner panel and slide the handle forward until the retainers are fully engaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the rear door trim panel for the 2006 GMC Canyon? Posted by Customer
    A:
    Slide the inside door handle rearward to release the retaining tabs from the door inner panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What are the final steps after installing the door handle for the 2004 GMC Canyon? Posted by Customer
    A:
    Reinstall the water deflector and the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after disconnecting the rods for the 2007 GMC Canyon? Posted by Customer
    A:
    Remove the bolts that secure the outside door handle to the door and take out the outside door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after installing the lock cables for the 2008 GMC Canyon? Posted by Customer
    A:
    Insert the inside door handle retaining tabs into the slots of the door inner panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after disconnecting the outside door handle rod for the 2009 GMC Canyon? Posted by Customer
    A:
    Disconnect the lock cylinder rod by releasing the retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle, Outside, Dark Smoke Gray, Front Driver Side 25875521 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25875521 Handle, Outside, Dark Smoke Gray, Front Driver Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25875521 Handle, Outside, Dark Smoke Gray, Front Driver Side fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 25875521 maintains top performance when functioning as the Handle-Front Side Door Outside *Dark Smoke Gry; Exterior Door Handle unit at its Front Driver Side. The component 25875521 is constructed from durable material and its dimensions span 4.4 x 4.5 x 12.9 inches while weighing 2.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Handle, Door Outside Handle. The part 25875521 has available replacement options 15224884, 97319316, 15847169, 15243676, 25801996. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.