Make sure this part fits

GM 15044795
Upper Hinge, Rear Lower

2004-2012 GM

Customer Questions & Expert Answers (11)
GM 15044795 Upper Hinge, Rear Lower
  • Part Description
    Hinge, Rear Side Door Lower Hinge; Door Hinge
  • Position
    Rear Lower
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15044795 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15044795 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after installing the body side front door hinge for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    With assistance, lower the front door onto the body side hinge straps and install the bolts retaining the front door hinge keeper straps, tightening them to 25 N.m (18.4 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the rear door check link bolt for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Take out the rear door wiring harness grommet from the body and disconnect the door wiring harness connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after installing the door side hinge for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    With help, lower the front door onto the body side hinge straps and install the bolts that retain the front door hinge keeper straps, tightening these bolts to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you install the new body side rear door hinge for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Position the body side rear door hinge to the alignment marks and install the bolts retaining the body side door hinge to the body, tightening them to 25 N.m (18.4 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after installing the body side front door hinge for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    With assistance, lower the front door onto the body side hinge straps.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the front side door hinge for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Open the front door and remove the bolt that retains the front door check link to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you install the new body side front door hinge for the 2010 GMC Canyon? Posted by Customer
    A:
    Position the body side front door hinge to the alignment marks, install the bolts retaining the body side door hinge to the body, and tighten them to 27 Nm (20 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after disconnecting the wiring harness for the 2004 GMC Canyon? Posted by Customer
    A:
    Remove the bolts that hold the rear door hinge keeper straps in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you prepare the body side hinges for the new hinge installation for the 2007 GMC Canyon? Posted by Customer
    A:
    Clean the mounting surfaces of the body side hinges with a clean rag and mark the front door hinge locations with a grease pencil or other suitable marker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you remove the front door for the 2009 GMC Canyon? Posted by Customer
    A:
    With assistance, lift the front door off the body side hinges and place it on a clean, protected surface.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Hinge, Rear Lower 15044795 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15044795 Upper Hinge, Rear Lower is available in the market under the name GM Door Hinge. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15044795 Upper Hinge, Rear Lower fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 15044795 maintains top performance when functioning as the Hinge, Rear Side Door Lower Hinge; Door Hinge unit at its Rear Lower. The component 15044795 is constructed from durable material and its dimensions span 5.3 x 4.8 x 2.7 inches while weighing 1.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Lower Hinge; Hinge, Door Hinge. The part 15044795 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 15044795. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.