Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15010349
Stabilizer Bar Bushing

2001-2005 GM

Customer Questions & Expert Answers (5)
GM 15010349 Stabilizer Bar Bushing
GM 15010349 Stabilizer Bar Bushing
GM 15010349 Stabilizer Bar Bushing
  • Part Description
    Insulator, Stabilizer Shaft; Sway Bar Bushing
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$2.80 MSRP: $5.00
You Save: $2.20 (44%)
Ships in 1-3 Business Days
1
ADD TO CART

  • 15010349 Stabilizer Bar Bushing is Ref No. 14 in the diagram below

    2005 Chevy Blazer Stabilizer Bar Bushing Diagram for 15010349
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15010349

  • Vehicle Fitment

    Year Make Model Trim Engine
    2001-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    2001-2004 Chevrolet S10Base, LS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    2001 GMC JimmyDiamond Edition, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    2001-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    2001 Oldsmobile BravadaBase6 Cyl 4.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15010349 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15010349 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front sway bar bushing on a 4WD on Chevrolet Blazer? Posted by Customer
    A:
    The procedure of sway bar bushing replacement for a 4WD vehicle begins by lifting and appropriately supporting the vehicle. The first step requires removal of the steering linkage shield then the sequence continues with sway bar bracket mounting bolt extraction followed by removal of the sway bar bracket. You must remove the sway bar bushing next in this process. The installation requires aligning the new sway bar bushing with the sway bar while keeping its slit oriented towards the front position. Afterward you can place the sway bar bracket over this alignment. Reinstall the steering linkage shield afterward you install the sway bar bracket mounting bolts which should be tight at 65 Nm (48 ft. lbs.) torque before lifting the vehicle down.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front sway bar bushing on a 4WD on Chevrolet S10? Posted by Customer
    A:
    The procedure of sway bar bushing replacement for a 4WD vehicle begins by lifting and appropriately supporting the vehicle. The first step requires removal of the steering linkage shield then the sequence continues with sway bar bracket mounting bolt extraction followed by removal of the sway bar bracket. You must remove the sway bar bushing next in this process. The installation requires aligning the new sway bar bushing with the sway bar while keeping its slit oriented towards the front position. Afterward you can place the sway bar bracket over this alignment. Reinstall the steering linkage shield afterward you install the sway bar bracket mounting bolts which should be tight at 65 Nm (48 ft. lbs.) torque before lifting the vehicle down.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front sway bar bushing on a 4WD on GMC Sonoma? Posted by Customer
    A:
    The procedure of sway bar bushing replacement for a 4WD vehicle begins by lifting and appropriately supporting the vehicle. The first step requires removal of the steering linkage shield then the sequence continues with sway bar bracket mounting bolt extraction followed by removal of the sway bar bracket. You must remove the sway bar bushing next in this process. The installation requires aligning the new sway bar bushing with the sway bar while keeping its slit oriented towards the front position. Afterward you can place the sway bar bracket over this alignment. Reinstall the steering linkage shield afterward you install the sway bar bracket mounting bolts which should be tight at 65 Nm (48 ft. lbs.) torque before lifting the vehicle down.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the sway bar bushing on GMC Jimmy? Posted by Customer
    A:
    A proper process for servicing and repairing the sway bar bushing requires initially lifting the vehicle while applying suitable support. The first step includes detaching the steering linkage shield before removing the sway bar bracket mounting bolts and both the sway bar bracket and insulator. Installation requires users to place the sway bar insulator on the shaft while the slit points toward the front and afterward to place the sway bar bracket on top of it. Fasten the sway bar bracket mounting bolts while tightening them to 65 Nm (48 ft. lbs.). The vehicle must have its steering linkage shield reinstalled before lowering it down.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Stabilizer Bar Bushing 15010349 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15010349 Stabilizer Bar Bushing is available in the market under the name GM Sway Bar Bushing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15010349 Stabilizer Bar Bushing fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15010349 maintains top performance when functioning as the Insulator, Stabilizer Shaft; Sway Bar Bushing unit at its Front. The component 15010349 is constructed from durable material and its dimensions span 3.9 x 3.5 x 1.9 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Bushings. The part 15010349 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.