Make sure this part fits

GM 25784241
Stabilizer Link

2008-2009 GM

Customer Questions & Expert Answers (4)
GM 25784241 Stabilizer Link
GM 25784241 Stabilizer Link
  • Part Description
    Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$22.82 MSRP: $42.86
You Save: $20.04 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25784241
    Part DescriptionLink, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
    Other NamesLink
    Item Dimensions8.9 x 1.9 x 1.5 inches
    Item Weight0.80 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU25784241
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2009 Chevrolet TrailblazerBase, LT, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2008-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25784241 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25784241 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear suspension sway bar link on Chevrolet Trailblazer? Posted by Customer
    A:
    Starting the replacement on the sway bar link in the rear suspension requires a raised and supported vehicle. When performing the removal of sway bar link retaining nuts users should avoid prying the sway bar link since this action could damage the sway bar link boot which would create additional complications. The sway bar link needs removal by disconnecting it from both the frame and the sway bar before removing it. During installation position the sway bar link between the sway bar and frame while always following safe fastening procedures. The installation begins by putting on sway bar link retaining nuts and tightening them to 90 Nm (66 lb ft) before lowering the automobile.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front sway bar link on GMC Envoy? Posted by Customer
    A:
    Vehicle elevation and supporting becomes the first step before you start to replace the Sway Bar Link. Begin by removing the tire combined with its wheel from the vehicle. Remove all dirt or debris particles from the threads of the Sway Bar Link bolt before starting the procedure. You must use the suitable wrench or socket for the sway bar bolt to unscrew the sway bar nut. Start by taking away the insulator and washer from the Sway Bar Link bolt before unfastening the bolt and its accompanying insulator and washer. Use additional tools to take away both insulators and spacer. Install by adding the insulator along with the washer onto the Sway Bar Link bolt. Make sure the insulators, along with, and find their proper position in the sway bar and the lower Control Arm when you mount the spacer together with the insulators. Use the sway bar bolt to place insulators and spacer between the sway bar and lower Control Arm during the installation procedure. Before bolting the Sway Bar Link you should place its components in this order: washer then insulator followed by insulator and washer. Fasten and torque the Sway Bar Link nut to 23 nm (17 lb ft). The vehicle needs its tire and wheel assembly reinstalled then the support system must be taken down before lowering it.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the stabilizer shaft link retaining nuts be installed for the 2008 GMC Envoy? Posted by Customer
    A:
    Install the stabilizer shaft link retaining nuts and tighten them to 90 N.m (66 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25784241, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25784241 Stabilizer Link. It is sometimes referred to as GM Sway Bar Link. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25784241 Stabilizer Link. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery