Make sure this part fits

GM 12595827
Intake Manifold

2007-2014 GM

Customer Questions & Expert Answers (10)
GM 12595827 Intake Manifold
  • Part Description
    Manifold, Engine Fuel Intake Manifold
  • Position
    Upper
  • Manufacturer
    General Motors
Make sure this part fits
$87.57 MSRP: $144.26
You Save: $56.69 (40%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number12595827
    Part DescriptionManifold, Engine Fuel Intake Manifold
    Other NamesManifold
    Item Dimensions7.1 x 13.3 x 12.1 inches
    Item Weight2.30 Pounds
    PositionUpper
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU12595827
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2014 Chevrolet Express 1500Base6 Cyl 4.3 L GAS
    2007-2013 Chevrolet Silverado 1500LS, WT6 Cyl 4.3 L GAS
    2008-2014 GMC Savana 1500Base6 Cyl 4.3 L GAS
    2007-2013 GMC Sierra 1500WT6 Cyl 4.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 12595827 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12595827 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the installation steps if the intake manifold was replaced for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the brake booster vacuum hose nipple to the new intake manifold, apply new fuel injector lower O-ring seals, lubricate them with clean engine oil, and install the fuel rail, tightening the bolts to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be disconnected from the throttle body for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Disconnect the engine wiring harness electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What seals need to be installed on the PCV cover and fuel meter body for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install a new O-ring seal to the PCV cover with clean engine oil, followed by the PCV valve cover, and a new O-ring seal to the fuel meter body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done with the EVAP canister purge solenoid valve tube for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Detach the tube quick connect fitting and reposition the tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What are the final steps after installing the intake manifold for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reassemble the P/S pump bracket, install the drive belt, reconnect the water pump inlet hose and radiator inlet hose, reconnect the power brake booster vacuum hose and PCV valve hose, then position and secure the engine wiring harness and its components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be removed if replacing the intake manifold for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Remove the brake booster vacuum hose nipple, upper intake manifold cover, MAP sensor, and throttle body, discarding the throttle body gasket and fuel injector lower O-ring seals.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done after removing the lower intake manifold bolts for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Remove the manifold itself and discard the gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What additional components need to be disconnected for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    Disconnect the control port injector module and the EVAP canister purge solenoid valve, then remove the engine harness clamp and the oil pressure sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How do you prepare for the installation of the new intake manifold for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Place new intake manifold gaskets onto the intake manifold and apply a band of threadlock to the threads of the intake manifold bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 12595827, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 12595827 Intake Manifold. It is sometimes referred to as GM Intake Manifold. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 12595827 Intake Manifold. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery