Make sure this part fits

GM 25971086
Motor Mount, Driver Side

2005-2011 GM

Customer Questions & Expert Answers (18)
GM 25971086 Motor Mount, Driver Side
GM 25971086 Motor Mount, Driver Side
  • Part Description
    Mount Assembly-Engine; Engine Mount Bracket
  • Position
    Driver Side
  • Replaces
    15880912
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25971086
    Part DescriptionMount Assembly-Engine; Engine Mount Bracket
    Other NamesMount; Mount, Engine Mount Dampening; Mount, Engine Mounting
    Item Dimensions8.2 x 5.5 x 5.5 inches
    Item Weight4.70 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15880912
    ManufacturerGeneral Motors
    SKU25971086
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2009 Cadillac SRXBase8 Cyl 4.6 L GAS
    2005-2011 Cadillac STSBase, Platinum6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25971086 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25971086 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2007 Cadillac STS? Posted by Customer
    A:
    Reinstall the right engine mount bracket and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed after raising for the 2007 Cadillac STS? Posted by Customer
    A:
    Remove the exhaust system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How should the engine mount be positioned during installation for the 2008 Cadillac STS? Posted by Customer
    A:
    Position the engine mount to the vehicle, ensuring the slotted washer is properly aligned between the engine mount and the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after removing the right engine mount bracket for the 2007 Cadillac SRX? Posted by Customer
    A:
    Remove the engine mount retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed after raising for the 2009 Cadillac SRX? Posted by Customer
    A:
    The exhaust system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be installed after lowering the engine for the 2008 Cadillac SRX? Posted by Customer
    A:
    The lower retaining nut, also tightening it to 80 N.m (59 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the torque specification for the right side transmission mount assembly bolt for the 2009 Cadillac SRX? Posted by Customer
    A:
    110 Nm (81 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step to replace the right side engine mount for the 2008 Cadillac STS? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after positioning the new mount for the 2006 Cadillac STS? Posted by Customer
    A:
    Install the transmission to support mounting bolts, tightening them to 60 Nm (44 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What conditions should you observe for that necessitate replacement of the transmission/transaxle mount for the 2005 Cadillac STS? Posted by Customer
    A:
    The hard rubber surface shows heat check cracks, the rubber is separated from the metal plate, or the rubber is split through the center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be reattached after tightening the bolts for the 2008 Cadillac STS? Posted by Customer
    A:
    The transmission vent hose to the retainers on the mount assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after removing the lower engine mount retaining nut for the 2009 Cadillac SRX? Posted by Customer
    A:
    Raise the engine using the screw jack until the weight is removed from the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed after raising for the 2007 Cadillac SRX? Posted by Customer
    A:
    Remove the exhaust system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How do you install the new engine mount for the 2005 Cadillac STS? Posted by Customer
    A:
    Position the new engine mount in place and install the engine mount retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    In what order should the transmission mount bolts be tightened during installation for the 2010 Cadillac STS? Posted by Customer
    A:
    First, hand-install the transmission mount support to transfer case mounting bolts, then tighten the right side bolt to 110 Nm (81 lb ft) and the left side bolt to 110 Nm (81 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step to replace the left engine mount for the 2006 Cadillac STS? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the torque specification for the transmission mount support to body mounting bolts for the 2008 Cadillac SRX? Posted by Customer
    A:
    60 N.m (44 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25971086, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25971086 Motor Mount, Driver Side. It is sometimes referred to as GM Engine Mount, GM Motor And Transmission Mount. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25971086 Motor Mount, Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery