Make sure this part fits

GM 22742382
Brake Pads

2008-2016 GM

Customer Questions & Expert Answers (19)
GM 22742382 Brake Pads
GM 22742382 Brake Pads
  • Part Description
    Pad Kit, Brake; Disc Brake Hardware Kit
  • Position
    Front
  • Replaces
    25918342
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2009-2014 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX
    2008-2014 Cadillac Escalade ESVBase, Luxury, Platinum, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2009-2013 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.2 L FLEX
    2013-2016 Cadillac XTSBase, Livery, Luxury, Platinum, Premium, Vsport Platinum, Vsport Premium6 Cyl 3.6 L GAS
    2009-2013 Chevrolet AvalancheBlack Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2009-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2009-2014 Chevrolet Express 2500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2009-2014 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2009-2016 Chevrolet Silverado 1500Custom, High Country, Hybrid, LS, LT, LTZ, SSV, WT, XFE6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2008-2014 Chevrolet Suburban 1500LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22742382 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22742382 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in replacing the front brake rotor for the 2009 Cadillac Escalade? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir; if it is above the midway point between the maximum-full and minimum allowable levels, remove fluid to that midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the next step after inspecting the fluid level for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the final procedure to ensure proper brake function for the 2010 Cadillac Escalade? Posted by Customer
    A:
    Firmly apply and maintain pressure on the brake pedal for 30 seconds to seat the brake pad insulators, repeating this step once more, and finally, burnish the brake pads and rotors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after removing the guide pin bolt for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Rotate the caliper upward and support it again.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done if installing new brake pads for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Clean the brake caliper piston faces and caliper housing to remove any adhesive residue, then apply a thin coating of high temperature silicone brake lubricant to the pad mating surfaces of the caliper bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after reinstalling the tire and wheel assembly for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Lower the vehicle and gradually apply the brake pedal to approximately 2/3 of its travel distance, then slowly release it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the first step in replacing the rear disc brake pads for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir; if it is above the midway point between the maximum-full and minimum allowable levels, remove fluid to that midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you compress the brake caliper pistons for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Position a large C-clamp against the outboard disc brake pad backing plate and over the rear of the brake caliper body, and use it to slowly bottom the brake caliper pistons into the caliper bores.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you compress the brake caliper pistons for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Use two large C-clamps placed over the caliper housing against the back of the outboard brake pad, tightening them until the pistons are fully retracted.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the first step in the burnishing process for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Begin by selecting a smooth road with little or no traffic.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the first step in replacing the rear disc brake pads (JH5, JH6) for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after inspecting the fluid level for the 2009 GMC Yukon? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done with the old brake pads and retaining springs for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the brake pads and retaining springs from the mounting bracket, ensuring to replace the old retaining springs with new ones.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the final step in the process for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Fill the master cylinder reservoir to the proper level with clean brake fluid and burnish the brake pads and rotors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How should you reattach the caliper to the bracket for the 2010 GMC Yukon? Posted by Customer
    A:
    Ensure the caliper bolts are tightened to 108 Nm (80 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What are the steps for installation of new brake pads for the 2010 GMC Savana 2500? Posted by Customer
    A:
    Place new anti-rattle clips on the inside ends of the caliper mounting bracket, install the new brake pads in the same orientation as removed, and then reinstall the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done if necessary after achieving a firm pedal for the 2010 GMC Yukon? Posted by Customer
    A:
    Fill the brake master cylinder reservoir to the proper level with clean brake fluid if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done with the old brake pad retaining springs for the 2010 GMC Yukon? Posted by Customer
    A:
    Discard the old brake pad retaining springs and inspect the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Brake Pads 22742382 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22742382 Brake Pads is available in the market under the name GM Brake Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22742382 Brake Pads fits certain Chevrolet Tahoe, Avalanche, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Savana 2500. Additionally, it is compatible with Cadillac Escalade, XTS, Escalade ESV models.
The original GM component designated by manufacturer part number 22742382 maintains top performance when functioning as the Pad Kit, Brake; Disc Brake Hardware Kit unit at its Front. The component 22742382 is constructed from durable material and its dimensions span 8.7 x 4.1 x 3.7 inches while weighing 5.60 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Front Pads. The part 22742382 has available replacement options 25918342. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.